Fire Fighting Soldier Decontamination Tent | Fire Fighting Soldier Decontamination Tent Configuration Introduction

1. Introduction to the configuration of the decontamination system of the fire individual decontamination tent

Product material: Oxford cloth, nylon fine woven pvc double-sided coated cloth, high frequency welding heat synthesis type

Technical parameters:

Size: 2*2*2.5M

Temperature range -30℃--+65℃

Hydrostatic pressure≥16kpa

Surface water resistance 160~200mm

Inflatable time 1-2min

This type of inflatable tent can be used as rescue and disaster relief and fire scene headquarters and fire industry decontamination . There are multiple high-pressure sprinkler heads inside, and there is a collection sewage pool below. The frame-type independent decontamination tent is mainly used for the decontamination of firefighters, and the toxic and harmful sewage is discharged into the sewage collection bag for centralized treatment.

Second, the performance characteristics of the fire individual decontamination tent

Equipped with electric charging and exhausting pump, decontamination pipeline, mixing tank, decontamination water supply pump, sewage pump, water storage Bags, waste water recycling bags and connecting pipes.

Description of the configuration of the fire individual decontamination tent:

1. Electric charging and exhausting pump:

It is used for quick inflation of the tent , it is convenient to open and stow the tent. Voltage: 230V, Power: 680W, Pressure: 2.8-10psi;

2. Decontamination and water supply pump:

It is used to collect natural water sources in the wild without artificial water sources. It can provide a continuous water source for the spray equipment in the decontamination tent. The motor power is 0.85KW, the voltage is 220V, the flow rate is 3600L/H hour, the maximum lift: 47M, and the water supply pressure is 2-6 bar. The water supply pump automatically stops when there is no water supply, and the safety valve automatically stops when the temperature is too high. The motor protection grade is IP65.

3. Decontamination and sewage pump:

Collect the decontaminated wastewater through a sewage pump, and then transfer it for treatment. Generator protection grade IP68 Shell material: corrosion-resistant PVC, voltage: 220V, head: 7m, maximum flow: 12000L/H, power: 260W, comes with a 3-5m drain pipe and 2 card-type quick connections, which can be connected with the sewage bag Quick dial connection, so that the sewage does not flow out and protect the environment from secondary pollution.

4. Detergent liquid mixing tank:

The siphon function of water flow directly mixes with water to form a proportioning liquid. Proportion range: 0.4-4%, flow range: 10-2500 liters/hour, water temperature: 4 degrees-50 degrees, working water pressure: 3pa, inlet and outlet diameter: 32mm/25mm weight: 1.8KG, hydraulic drive, no electricity required . The flowing water pushes the piston. Accurately proportionally increase the liquid medicine. As long as there is water flow through, it can always be added in proportion, and the proportion remains constant. Both ends of the inlet and outlet are equipped with hoses and 2 cassette quick connectors, which can be connected to the tent's chemical spray system and decontamination water heater.

5. Decontamination wastewater recycling bag:

Used to collect fire water, decontamination wastewater, chemicals, oil and other dangerous liquids, equipped with water inlet and outlet, the water inlet can be connected with the sewage pump Quick connect to use. The safety valve facilitates the recovery and discharge of waste water, with a capacity of 500L. Interface: 1 inch quick connect.

6. Water storage bag:

It is made of high-strength PVC composite air-tight camouflage cloth and processed by high-frequency welding machine. It is wear-resistant, flame-retardant and soft, and can be folded at will , An environmentally friendly soft water storage container with convenient storage. It is suitable for camping or use without fixed water storage facilities, and can solve practical problems of water resources emergency.

Thickness 0.70mm, weight 896.5g/m2

Tear Strength: Radial 384N, Weixiang 298.3N

Peel Load: Radial 105.8N/ 5cm, Weixiang 93.1N/5cm

Temperature resistance -40℃~70℃

Capacity: 1000L

Fire Protection List Workflow of Soldier Decontamination Tent

1) Pull out the quick connector, remove the water bag to fill with water, and store the water to the water level line. At this time, the water in the water bag is 40L in total, and it will be reset after filling up.

Note: If you want to take a hot bath, you can add hot water of appropriate temperature to the water bag. The water bag is made of black material, which has good heat absorption. Put it in cold water and expose it to the sun

2) Start using the air pump to inflate and pressurize the water bladder for the first time, and press it for about 8 times

3) Put the water bladder Connect with the water pipe, open the shower valve, and take a bath. As the water volume in the water bag gradually decreases, the air pressure in the water bag decreases at this time, and manual pressure supplementation is required, (after flushing for about 5 minutes)

4) The first time to re-pressurize, about 3 times, it can be rinsed for about 5 minutes

5) The second time of re-pressure, about 5 times, it can be rinsed for about 5 minutes

6) The second time to re-pressurize, about 6 times, and it can be rinsed for about 6 minutes

7) The second time of re-pressure, about 6 times, it can be rinsed for about 6 minutes

8) If the water in the water bladder has been used up at least or has been used up, if you need to replenish the water bladder to continue bathing, please deflate it first, and fill it with water