JOY inflatable Inflatable water park factory for outdoor

Company Advantages
1. Inflatable water park is a challenging and fun play equipment, which is manufactured based on good materials. It is unique in shape and good in workmanship. It helps improve kids' physical strength and intelligence and enables them to enjoy happiness while at play.
2. To ensure the high reliability of Inflatable water park provided, JOY inflatable well selects the high-end materials to produce. We can print your logo, slogan or other information you ask for
3. The seams and seam allowances of the product are even. The advanced stitching machinery is used during the production to make sure every stitching is finely treated. All the materials we used are based on the international standard

All kinds outside activities

1.For party event     2. wedding       3. As a store       4.exhibition 

Sewing machine for the inflatable model  gas column with oxford fabric double-sided coated cloth, tarpaulin waterproof, anti-ultraviolet materials, with fast forming, high strength, fire, mildew, anti-ultraviolet, moisture Etc. Tent for the inflatable tent, tent frame for the gas column structure, compared with the general metal bracket tent, with a light, folded after the small size, easy to carry and so on.

How to install  the inflatable advertising products?                                                                                                                    

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the tent on the ground .
5.Connect the air inlet of inflatable tent and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable tent will be inflated within 10-30 minutes (depend the size of the tent ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design 

2、free repair kit and After-Sale service 

Company Features
1. We have invested a series of advanced production facilities. By utilizing these machines, we can put close eyes on our production, minimizing delays and allowing flexibility in delivery schedules.
2. We will actively promote sound environmental management and sustainable development. We will use and promote advanced technological production facilities to reduce the environmental negative influence.