JOY Inflatable High-quality blow up dance club dealer for parties

Company Advantages
1. blow up dance club is designed as and provides solution. Our products have been sold to over 60 countries including Japan, France, America and etc
2. [企业简称] Actively adopt new technology and new technology in the industry, constantly develop and innovate, and strive to improve the internal performance and external quality of the product, so that the blow up dance club produced has always maintained the performance, price, quality, etc. compared with other similar products market competitive advantage.
3. The product has survived the rigorous quality and durability testings. What's more, our products are anti UV
4. Our quality inspectors make sure that the product is in accordance with international quality standards. We adopt environmental protection and and non-toxic materials
5. Every piece of the product is strictly checked according to the international quality system. Excellent tensile and tear also makes our products outstanding

All kinds outside activities

1.For party event     2. wedding       3. As a store       4.exhibition 

All sewing inflatable products are made by high precision machines and using unique 12 in one waterproof nylon threads . We use double stitching for both inside and outside of the products and quadruple stitching for the force loading bottom . For each corner and connection, there are reinforce straps to make sure the product are safe enough for all wind and tension . The length of each single sewing needle is 3mm-8mm

Installation of the tent

1.Site selection: large and high enough to place the tent on the ground .

        2.         Clean up the site, make sure no sharp objects .And keep away from high-voltage wires.

        3.         It’s advised to place a sheet of fabric beneath the tent.

     4.         Spread out and flat the tent on the ground .

5.         Connect the air inlet of inflatable tent and the outlet of blower tightly, then tight connect part with a rope.

6.         Turn on the blower switch, tent will be inflated within 10-30 minutes (as per the size of the tent ).

7.         If there is wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes into ground .

Installation of Air Blower:

1.         Specification of electricity ranges among different countries. Check and make sure air blower provided matches local system.

2.         Keep little children away from air blower’s air inlet. If needed,a protective net is suggested.

u   Tips:

1.         Under severe weathers (6 grade or above strong wind,heavy rain, snowy, fogy etc), inflatable tent and blower are prohibited to use at outdoors.

2.         When encountering any inflation failure, check if there is any leakage, power failure or bad connection.

        3.         If air pressure is too strong, cover the air inlet of blower for some time.

4.         Continuous air supply is needed. Please keep air blower connected and on during use.

Maintenance

        1.         Clean and dry the damage part .

2.         Find from repair kit the repair fabric and cut a suitable piece ,round shape is advised.

3.         Put some glue both on the damage part and repair material,wait about 5 minutes until glue dries.

4.         Paste repair material on the damage part and press for a while. The tent can be used again a few hours later.

        5.         If there is large-scale non-normal damage,please ask factory for guidance .

 

High quality inflatable tents are now available on link below.

https://www.joyinflatable.com/inflatable-tent

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design 

2、free repair kit and After-Sale service 

Company Features
1. As a robust and powerful firm, Guangzhou JOY Inflatable Limited has been widely known in the blow up dance club field. We have a wide variety of talents that drives our ability to innovate. They secure us a variety of perspectives to address the challenges ahead of us. They are the source of innovative solutions and new opportunities.
2. Situated in an advantageous geographical setting, the factory is close to some crucial transportation hubs. This enables the factory to save a lot in transportation cost and shorten delivery time.
3. There are many different industries that our products play a critical role in. With the increasing spread of technology, more different uses will constantly evolve. We comply with the regulations of waste management. We ensure any waste and emission we produce as a result of business operations are handled appropriately and safely.