JOY Inflatable outdoor slide for adults supply for children

Company Advantages
1. outdoor slide for adults tend to be than other brands. JOY can customize the specification, package, color and height of the products
2. This product is an essential part of the most majority of electronic assemblies, power electronic devices, and optoelectronic components. And our products can be installed very easily
3. outdoor slide for adults The performance is stable, the operation is stable, the operation is simple, the use is safe, the battery life is strong, and the service life is long.

All kinds outside activities.  

it must be built up on a slipe with 15-30 angles ,both street and hill 

The slip n slide is a classic backyard activity. That’s why we offer commercial slip n slides for summer camps, resorts and homes that take this time-honored concept and we put our own adventurous twist on it. 

Sewing machine technology: double stitching everywhere and strong reinforcement at joint part .

Features : work with the blower all the time

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the slide on the ground .
5.Connect the air inlet of inflatable slide and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable slide will be inflated within 2-5 minutes (depend the size of the slide ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design 
2、free repair kit and After sale-service 

Company Features
1. Thanks to years of self-development, Guangzhou JOY Inflatable Limited has accumulated rich experience in designing and manufacturing . We have been recognized as a dependable manufacturer. Over years of marketing, we have established a cooperative relationship with a number of customers and won trustworthy from them. This is evidence of our business strength.
2. The factory is characterized by its advantageous geographic position where embraces many industrial clusters. Under the increased access to information or raw materials that accompany cluster manufacturing, we are able to significantly increase our productivity.
3. We own a range of modern production facilities that are manufactured under high technologies. These highly precise machines help guarantee product quality as well as improved productivity. JOY Inflatable concentrates on providing high quality service for customers. Get an offer!