JOY Inflatable inflatable nightclub with led lights wholesale for clubs

Company Advantages
1. inflatable nightclub with led lights is constructed with eco-friendly materials and fine processing techniques. It is safe and environment-friendly as well as sturdy and durable.
2. [企业简称] regards product quality as the life of the enterprise, actively absorbs advanced foreign management experience and manufacturing technology, improves and optimizes inflatable nightclub with led lights , and ensures that inflatable nightclub is superior to other products on the market in terms of quality, performance, and appearance. Similar products.
3. inflatable nightclub with led lights The performance is stable, the operation is stable, the operation is simple, the use is safe, the battery life is strong, and the service life is long.
4. inflatable nightclub with led lights The computer configuration is advanced, the picture quality is smooth and clear, the sound quality is three-dimensional and shocking, the game content is rich and colorful, the playability is high, and the interest is strong. It is an entertainment device suitable for all ages.
5. inflatable nightclub with led lights Manufactured in strict accordance with relevant national standards, with stable performance and excellent quality, it has the characteristics of high control precision, strong impact resistance and long service life.

All kinds outside activities

1.For party event     2. wedding       3. As a store       4.exhibition 

All sewing inflatable products are made by high precision machines and using unique 12 in one waterproof nylon threads . We use double stitching for both inside and outside of the products and quadruple stitching for the force loading bottom . For each corner and connection, there are reinforce straps to make sure the product are safe enough for all wind and tension . The length of each single sewing needle is 3mm-8mm

Installation of the tent

1.Site selection: large and high enough to place the tent on the ground .

        2.         Clean up the site, make sure no sharp objects .And keep away from high-voltage wires.

        3.         It’s advised to place a sheet of fabric beneath the tent.

     4.         Spread out and flat the tent on the ground .

5.         Connect the air inlet of inflatable tent and the outlet of blower tightly, then tight connect part with a rope.

6.         Turn on the blower switch, tent will be inflated within 10-30 minutes (as per the size of the tent ).

7.         If there is wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes into ground .

Installation of Air Blower:

1.         Specification of electricity ranges among different countries. Check and make sure air blower provided matches local system.

2.         Keep little children away from air blower’s air inlet. If needed,a protective net is suggested.

u   Tips:

1.         Under severe weathers (6 grade or above strong wind,heavy rain, snowy, fogy etc), inflatable tent and blower are prohibited to use at outdoors.

2.         When encountering any inflation failure, check if there is any leakage, power failure or bad connection.

        3.         If air pressure is too strong, cover the air inlet of blower for some time.

4.         Continuous air supply is needed. Please keep air blower connected and on during use.

Maintenance

        1.         Clean and dry the damage part .

2.         Find from repair kit the repair fabric and cut a suitable piece ,round shape is advised.

3.         Put some glue both on the damage part and repair material,wait about 5 minutes until glue dries.

4.         Paste repair material on the damage part and press for a while. The tent can be used again a few hours later.

        5.         If there is large-scale non-normal damage,please ask factory for guidance .

 

High quality inflatable tents are now available on link below.

https://www.joyinflatable.com/inflatable-tent

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design 

2、free repair kit and After-Sale service 

Company Features
1. Guangzhou JOY Inflatable Limited is growing rapidly in China. Over the years, we are engaged in the design and production of . Over the years, we have won various titles, such as honor of China's Influential Enterprise and High-Integrity Enterprise. These awards are strong evidence of our manufacturing and supplying competence.
2. Our strength lies in having flexible facilities and production lines. They run smoothly under scientific management systems, meeting the needs of a range of manufacturing processes.
3. The factory has newly introduced many advanced manufacturing facilities and testing equipment. The technological advantages have translated into improving overall productivity. Based on the idea of inflatable nightclub with led lights , JOY Inflatable has always been standing at the strategic height to push forward implementation of the plans. Ask!