JOY Inflatable Disco Dome Nightclub EXW / FOB / CFR / CIF Disco Dome Nightclub for Sale

Company Advantages

· Our dedicated design team has given JOY Inflatable disco dome nightclub an aesthetically pleasing look.

· disco dome nightclub can ensure good performance and value, and give full play to a certain role.

· Apart from the above characteristics, the product also has the feature of wide application.

Inflatable tent

Outdoor Event Advertising Stage Inflatable Shelter Tent

1.USE : Inflatable Marquee tent can be used both indoor and outdoor different activities, such as wedding party, exhibition, promotion, sport hall and ect
2.Installation :inflatable tents are easy to set up in a short time, and moveable to another place from one place as requested, it can stand up after inflated by air blower
3.Fix :We have make anchor in the bottom and D ring on the roof for light hanging inside. The tent can resist 6 level wind after fasten the tent.

All kinds outside activities

1.For party event     2. wedding       3. As a store       4.exhibition 

                           

Technology

Sewing : we adopt special double needle strong thread sewing anywhere and quadruple stitching in positions sustaining much force and pressure for the tent .

Feature : work with the blower all the time 

                           

easy to install 

You can install or disassemble in a very short time to save you valuable time; better insulation, inflatable tents with high quality pvc waterproof canvas, tear resistance, better tensile strength, anti-aging Better sex, long service life. In the weight and 6 wind load under the safe use of continuous service life of more than 2 years.

                           

Smaller and lighter 

Therefore, compared to ordinary metal bracket tent, the inflatable tent has its unmatched advantages, its light weight, small size, in the transport with ordinary metal bracket tent does not have the advantage. And its erection and removal are very simple, will not waste more manpower and time, especially for emergency response in the emergency use. In the harsh environment can not be reached when the inflatable tent can also be empty.       

All sewing inflatable products are made by high precision machines and using unique 12 in one waterproof nylon threads . We use double stitching for both inside and outside of the products and quadruple stitching for the force loading bottom . For each corner and connection, there are reinforce straps to make sure the product are safe enough for all wind and tension . The length of each single sewing needle is 3mm-8mm

With D anchors 

VS

Without.

With pvc materials more strong

VS

With oxford fabric

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the tent on the ground .
5.Connect the air inlet of inflatable tent and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable tent will be inflated within 10-30 minutes (depend the size of the tent ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design 

2、free repair kit and After-Sale service 

Company Features

· Over years of development, Guangzhou JOY Inflatable Limited has become a global company that provides high-quality disco dome nightclub.

· The factory has a large number of advanced and professional production facilities and testing instruments. This enables us to carry out the strict testing program and management system in terms of product quality. Our factory has built up a management system in terms of product quality. This system requires all of the products to undergo multiple quality inspections by professional equipment.

· Sustainability is a core element of our company. With our products, we offer the market a clear signal that our company has outstanding sustainability advantages, focuses on product performance, and benefits customers, the value chain, and society as a whole.

Product Comparison

Compared with other similar products, our disco dome nightclub has the following advantages.

Enterprise Advantages

JOY Inflatable has a strong R&D team to ensure the product quality and has a professional service team to guarantee the excellent service.

provides customers with a full range of services to meet the individual needs of different customers.

JOY Inflatable's enterprise spirit is to optimistic, united and pioneering. The business is focused on integrity, mutual benefit, and common development. We continuously deepen system reformation and expand sales channels. Our goal is to provide customers with quality products and services.

With years of accumulated experience, JOY Inflatable has created a complete industrial chain business model.

JOY Inflatable has a nationwide sales network. Some products are exported to some countries and regions in Asia, Europe, Latin America, and Africa. This greatly improves the corporate influence in the industry.