High-quality Blow Up Night Club Company

Product details of the blow up night club

Product Introduction

Thanks to the low cost of raw materials and the high efficiency of streamlined production, blow up night club products have the advantage of high gross profit margin. Multiple tests have been conducted in every production stage to ensure the consistent quality of the product. With the new product developing technology, Guangzhou JOY Inflatable Limited can shorten the development cycle of blow up night club and reduce costs.

Portable club tent has wide range of application for disco, party, wedding, event, etc. The blow up club tent is an innovative solution that caters to the evolving needs of event organizers and party enthusiasts. Combining convenience with functionality, this blow-up tent offers a quick and hassle-free setup process, thanks to its pop-up design. Its lightweight yet sturdy construction ensures durability while enabling easy transportation from one location to another. With spacious interiors, the portable club tent can comfortably accommodate a large number of guests while providing privacy and protection against external elements. Equipped with advanced ventilation systems, these tents ensure proper airflow even during crowded events, preventing stuffiness inside. The versatile nature of these blow up tents makes them suitable for various applications such as outdoor music festivals, corporate gatherings, wedding receptions, or celebratory parties where creating an exclusive ambiance is crucial. Additionally, their customizable features allow event planners to create unique atmospheres by incorporating branded signage or lighting effects specific to the occasion. Overall, the portable club tent stands out as an essential asset in enhancing any social gathering experience through its seamless setup process and adaptability to diverse settings. Custom pop up club tent/blow up tents, welcome to contact us.

Inflatable Cube Party Advertising Exhibition Trade Show Tent in Black

1. USE : Inflatable club tent can be used both indoor and outdoor different activities, such as wedding party, exhibition, promotion, sport hall and ect.
   
   

2. Installation : Inflatable tents are easy to set up in a short time, and moveable to another place from one place as requested, it can stand up after inflated by air blower
   
   

3. Fix : We have make anchor in the bottom and D ring on the roof for light hanging inside. The tent can resist 6 level wind after fasten the tent.

All kinds outside activities

1.For party event     2. wedding       3. As a store       4.exhibition 

                           

zip & Velcro pocket

Quickly to deflate the air when you open the pocket

                           

Waterproof roof 

Our inflatable tent is with the slant roof .It is easy to drain away the water in the rain or snow day .

Each connect part weld transparent pvc to make sure 100% waterproof for out tent .

                           

D anchor

The tent with a lot of D anchors , inside for you hand something such as light and the electric wire . Outside anchors for you fix the tent on the ground .

All sewing inflatable products are made by high precision machines and using unique 12 in one waterproof nylon threads . We use double stitching for both inside and outside of the products and quadruple stitching for the force loading bottom . For each corner and connection, there are reinforce straps to make sure the product are safe enough for all wind and tension . The length of each single sewing needle is 3mm-8mm

Slant roof to drain away the water

VS

flat roof

Transparent waterproof strip cover the seam

VS

Without anything cover the seam (not waterproof )

Installation of the tent

1.Site selection: large and high enough to place the tent on the ground .

        2.         Clean up the site, make sure no sharp objects .And keep away from high-voltage wires.

        3.         It’s advised to place a sheet of fabric beneath the tent.

     4.         Spread out and flat the tent on the ground .

5.         Connect the air inlet of inflatable tent and the outlet of blower tightly, then tight connect part with a rope.

6.         Turn on the blower switch, tent will be inflated within 10-30 minutes (as per the size of the tent ).

7.         If there is wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes into ground .

Installation of Air Blower:

1.         Specification of electricity ranges among different countries. Check and make sure air blower provided matches local system.

2.         Keep little children away from air blower’s air inlet. If needed,a protective net is suggested.

u   Tips:

1.         Under severe weathers (6 grade or above strong wind,heavy rain, snowy, fogy etc), inflatable tent and blower are prohibited to use at outdoors.

2.         When encountering any inflation failure, check if there is any leakage, power failure or bad connection.

        3.         If air pressure is too strong, cover the air inlet of blower for some time.

4.         Continuous air supply is needed. Please keep air blower connected and on during use.

Maintenance

        1.         Clean and dry the damage part .

2.         Find from repair kit the repair fabric and cut a suitable piece ,round shape is advised.

3.         Put some glue both on the damage part and repair material,wait about 5 minutes until glue dries.

4.         Paste repair material on the damage part and press for a while. The tent can be used again a few hours later.

        5.         If there is large-scale non-normal damage,please ask factory for guidance .

High quality inflatable tents are now available on link below.

https://www.joyinflatable.com/inflatable-tent

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design 

2、free repair kit and After-Sale service 

Company Feature

• Our company's geographic location is superior, and the traffic is convenient.
• Our company's products are sold well in the domestic market. And they are also exported to Southeast Asia, Central Asia, Europe and the United States as well as other countries and regions, gaining affection from overseas customers.
• JOY Inflatable has a development team with many years of technical experience, and the team members have strong industrial logic thinking and industry experience, providing a strong guarantee for our development.
The products produced are qualified products of high quality. If you are interested in our products, please contact us!