Outdoor Exhibition Inflatable Backyard Party Tent with LED

Outdoor Exhibition Inflatable Backyard  Party Tent with LED we made it in Commercial grade Oxford fabric matrial,which is more economic ,light weight and portable. And our Inflatable igloo dome tent meet the CE&EN71 standard . We double stitch everywhere and fourfold stitch at the bottom point place. We use strong KK brand zipper for the door  of the igloo tent and the door panel can be taken off . We make flap on the bottom , the flap can slow down air out when power cut off suddenly.

Size of dome tent in the picture showing you is 5m in diameter with one entrance and it can hold about 10-15 people for the backyard party .

All kinds outside activities.  1.party .  2.sunshade .   3.exhibition 

                           

Attractive 

For this igloo tent, it is totaly white oxford fabric material, which makes the tent is elegant. When you docorated with 16 colors LED lights, the tent is really attractive in any events, no matter it is in party or promotion event, it will be focus.

                           

easy to set up and transport

There is a shelter entrance and with the external size 5m in diameter and the weight is 34Kg . It will take 1 mins and just 1 people to set it up on the ground .
.

                           

D ring

We have make anchor in the bottom and D ring on the roof inside and outside . Bottom and outside roof 's D anchor isfor you fix the tent on the ground and the inside roof 's D ring is for light hanging inside.

Sewing machine for Cube silver tent and high-frequency heat combined for dome tent with the process of production, gas column with PVC double-sided coated cloth, tarpaulin waterproof, anti-ultraviolet materials, with fast forming, high strength, fire, mildew, anti-ultraviolet, moisture Etc. Tent for the inflatable tent, tent frame for the gas column structure, compared with the general metal bracket tent, with a light, folded after the small size, easy to carry and so on.

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the tent on the ground .
5.Connect the air inlet of inflatable tent and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable exhibition tent will be inflated within 10-30 minutes (depend the size of the tent ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable party tent will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design 
2、free repair kit and the After-sale service