Inflatable Igloo Dome Air Tent for Any Party or Event

The Inflatable PVC Tarpaulin Tent is the perfect choice for weddings, parties, and outdoor celebrations. While hosting an event under the open sky is always magical, unpredictable weather can be a concern.

Our inflatable PVC tarpaulin tent provides 100% protection against rain and cold when all windows and doors are securely closed using zippers and Velcro.

Setting up the tent is quick and effortless—it takes just 20 minutes! Simply place the tent, plug in the air blowers, and watch it inflate on its own in less than 20 minutes. For added stability, the tent is designed with multiple D-anchor points at the bottom, allowing you to secure it firmly to the ground using stakes.

Enjoy your event worry-free with our reliable and easy-to-use inflatable tent!

All kinds outside activities

1.For party event     2. wedding       3. As a store       4.exhibition 

                           

Technology

All of our inflatable PVC tarpaulin tents are designed to be seamlessly connected through their doorways, which serve as joining tunnels. This allows you to link tents of the same size or different sizes, creating a customized event space.

Need more flexibility? Even an inflatable igloo tent can be connected to a cube tent, giving you endless possibilities for your setup!

                           

Cuztomized service 

You can choose from our standard range of inflatable structures or share your ideas with us, and we’ll design a custom inflatable tent tailored to your exact requirements.

With years of expertise, our highly skilled team has designed and built an unparalleled collection of award-winning inflatable giant tents, ensuring exceptional quality and innovation for your event.

                           

More Stable 

 Our inflatable domes and tunnels are among the most space-efficient structures, offering maximum floor area relative to their size. Designed for durability, they are exceptionally robust and can withstand strong winds and heavy snow loads better than other tent shapes, ensuring reliability in all conditions.

All sewing inflatable products are made by high precision machines and using unique 12 in one waterproof nylon threads . We use double stitching for both inside and outside of the products and quadruple stitching for the force loading bottom . For each corner and connection, there are reinforce straps to make sure the product are safe enough for all wind and tension . The length of each single sewing needle is 3mm-8mm

Slope roof good at draining away the the water 

VS

flat roof ponding on the roof .

Transparent materials skylight 

VS

Without the skylight

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the tent on the ground .
5.Connect the air inlet of inflatable tent and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable tent will be inflated within 10-30 minutes (depend the size of the tent ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design 

2、free repair kit and After-Sale service