Inflatable tent leak repair

Inflatable tents have the advantages of light weight, simple assembly, fast lifting speed, and long duration of rigidity and stability, and are widely used in camping, military, disaster relief, medical and other places. It adopts the principle of structural mechanics to design the frame, uses the gas pressure characteristics to expand the airbag to form a rigid cylinder, and supports the skeleton of the inflatable tent through organic combination. But how to quickly repair if the inflatable tent is found to be leaking during use?

Inflatable tents are generally equipped with repair kits. If the air leak is a small hole, you can use a small piece of circular repair cloth, then brush the special glue for inflatable tents, and stick it to the leak after the glue dries. Point on (note: it is forbidden to stick up just after brushing the glue, it will not stick).

Easy to repair the small hole of the air leak in the tent

1. Check the air leak point:

1. Wipe the air column first Clean and smear the surface with soapy water to check for leaks.

Second, find a quiet place (better at night), full of air, and then listen quietly around the inflatable tent, you will definitely hear the sound of air leakage, and then find the root cause.

2. Dealing with air leaks:

Tools needed: air column cloth, special glue provided by the manufacturer. If the leak point is a small hole, you can use a small piece of air column cloth (it is standard in any specification of Yatu Zhuofan inflatable tent), then apply glue, and stick it on the leak point after the glue dries. Adhesion is tight. If the air leakage is the glue opening at the air column heat seam, it can be dealt with in the following steps:

1. Clean the bonding surface first.

Second, the issued inflatable tent will be provided with a bottle of glue, a special glue for the air column of the inflatable tent, and brush it on the pre-bonded surface. It must be painted evenly and the thickness is appropriate. After brushing twice , it can be glued.

3. The shape of the bonding interface should be designed to be circular or oval, try to avoid the shape of square and acute-angle interface, and the overlap width should not be less than 30mm.

4. After the glue has evaporated, it can be bonded. The patch must be flat and without wrinkles. Rolling and scraping are carried out. At the same time, a heat source is supplied with a hair dryer to facilitate bonding. It can be inflated for use after 6 hours of bonding. (Note: When using glue and air column can not fill the air leakage, the glue must be dried before bonding, and the time is about 10-20 minutes)

The air column of the inflatable tent is leaking

If the air leakage is glued at the heat seam, first clean the bonding surface with a rag, and then brush the glue. It must be evenly brushed and the thickness is appropriate. After brushing twice, use a maintenance cloth Just paste it directly. After the repair is completed, the repaired surface needs to be cooled for 24 hours before being erected again.

How to deal with the big hole in the inflatable tent

When the air leakage point is very large and the diameter exceeds 15 cm, you can use the above method to temporarily repair it, and you can use the above method to repair it when you have free time. Return to the factory for free maintenance to ensure the quality of the inflatable tent!

Each product will undergo a gas test before sending out, to ensure that there are no problems before sending the finished product. Of course, the air leakage prevention of the inflatable tent is still inseparable from daily maintenance and repair, mainly in the following points:

1. The inflatable tent should not be in contact with sharp objects when using it, so as not to scratch the airbag.

2. The inflatable tent should be operated in strict accordance with the instructions in the manual, and the precautions in the manual should be followed first.

3. When the temperature is high in summer, the air volume should not exceed the above-mentioned standard, and the air volume should be checked at any time. When the pressure is too high, it should be properly vented. In winter and in the morning, when the temperature is slightly lower, pay attention to appropriate pressure to avoid affecting Normal use.

4. Do not approach objects with a temperature above 70°C and open flames, and try to avoid prolonged contact with objects above 50°C for TPU products.

Professional kids water park also understand that when you're working with inflatable park product, it's important to understand that quality of inflatable theme park always matters.

For good quality kids water park and a good variety of products to choose from, visit Guangzhou JOY Inflatable Limited at JOY Inflatable.

inflatable park inflatable theme park is slower than kids water park but has a number of special applications, such as for inflatable park.