Inflatable Dock Water Slide for Yacht

       

       The freestyle inflatable water slide for cruiser yacht is the best in the world customized  ,airtight inflatable watre slide for the yacht industry .Our vision for cutting edge family entertainment has led to the development of some the most unique inflatable yacht slides in the world . The freestyle cruiser is a highly unique product that provides the most exciting experience in the inflatable water toys on board yachts 

         The size is 5m length ; 1.5m width and 3.4m height and any size can be customized we would make the yacht slide according to the height of your yacht  .The idea is that riders can experience different ways of going down our yacht slide which bring a whole new dimension to the sport  of sliding . The Yacht slides' 45 degree drop is extremely exhilarating and allow riders to reach incredible speeds .

  

                         

connection 

Connecttion systems we designed the slide connect with the support with D achors ring and the fabirc make the whole water slide very stable and robust 

                           

Reinforement 

Reinforcement. We make reinforcements at every weak points like welding seams, inside baffles as same as pictures . 

                           

D anchors ring

Durable anchor ring. For anchor ring, we use 316 stainless steel material which last longer than other metal in water. anchor rings are welded instead of glue, it’s not easy to peel off.

Reinforcement. We make reinforcements at every weak points like welding seams

Features : only once inflate by the air pump .

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the slide  on the ground .
5.Connect the air inlet of inflatable slide and the outlet of air pump tightly.
6.When the blower switched on, inflatable slide and the support will be inflated within 2 minutes (depend the size  ).
7.Connenct the water slide and the support . and then install it with the yacht .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design 
2、free repair kit and After sale-service