Inflatable Disco Dome Tent With LED Light

Inflatable Disco Domes Tent is a fantastic new inflatable bouncer which has become extremely popular from 2016 

 It’s an all in one party bouncer that has it’s own internal different colors disco lights. Along with this each inflatable/tent we will make the hole for your own internal loud PA speaker that not only fills the dome/tent, but outside and into the rest of the venue as well if you want it to.

Inflatable Disco Domes Tent  is great for all occasions childrena and the adult are love it . The speaker system works on Bluetooth technology, so you can simply connect your smart phone, iPad or any other bluetooth device and play your own choice of music! You can dance with music

All kinds outside activities

1.For party event     2. bouncer 

                           

Technology

Sewing : we adopt special double needle strong thread sewing anywhere and quadruple stitching in positions sustaining much force and pressure for the tent .

Feature : work with the blower all the time 

                           

Digitally printing  

This disco dome tent has fantastic disco themed Digitally printing around the tent with disco dancers . Or we can print any company logo or different them priting .

Outside is with glossy pvc materials to attract the people and inside wall and the floor we are using the dark pvc materials to make the most of the disco light effect !

                           

LED light 

The inflatable disco dome tent is with different colors  led light . And the Led is with all kinds of patterns. The led light will be changed according to the volume of the music . Or you can changed the color by the remote control .We will make the D anchor on the top for you to install the LED light . 

Sewing machine for Cube silver tent and high-frequency heat combined for dome tent with the process of production, gas column with PVC double-sided coated cloth, tarpaulin waterproof, anti-ultraviolet materials, with fast forming, high strength, fire, mildew, anti-ultraviolet, moisture Etc. Tent for the inflatable tent, tent frame for the gas column structure, compared with the general metal bracket tent, with a light, folded after the small size, easy to carry and so on.

How to install  the inflatable tent ?                                                                                                                                                                              

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the tent on the ground .
5.Connect the air inlet of inflatable tent and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable tent will be inflated within 10-30 minutes (depend the size of the tent ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design 

2、free repair kit and the After-sale service