loading

Construction steps of decontamination inflatable tent

by:JOY Inflatable     2022-06-24

Various tents are used differently. First let me talk about how to build a normal fire tent. First choose a campsite and spread the inner tent of the fire tent on the ground (usually the inner tent, but there are also some that first build the outer tent and hang the inner tent inside), such as Eurohike, the principle is to put on the upper layer), take out the folded Tent poles, straighten the sections, connect them into one long pole, and follow the instructions to put them into the tent pole cover on the tent. Regular tents are cross-threaded. Below we explain in detail the construction steps of the decontamination inflatable tent.

Insert one end of each pole into the small hole in the top of the fire tent, then two people hold both moving heads at the same time, then lift the pole net to arch the tent until that side can also be inserted the head into the small hole. After inserting it into the hole, the shape of the tent becomes. Use string to tie the cross of the tent poles, then you can hold this behemoth (which is actually quite light) with one hand and hook the four corners. Insert the loop into the soil so that the bottom of the tent is slender and open, tightening the entire tent. . Take a picture of the elephant. Then choose the direction of the door to fix the tent on the ground.

Now start hanging the external account, open the external account, cover the internal account, pay attention to the internal account, the door of the external account must face one direction, hang the four corners on the four corners of the internal account (in the Nearby location, you can find where to hang), some people pin the four corners of the fire tent to the ground near the four corners of the inner tent to see if there are hanging loops to pin the tent so that the tent is also taut. , there is no place to install the inner tent, so the inner tent will not get wet when the fish is placed, and a layer of dew or frost will form on the outer tent in the morning due to breathing, and if the inflatable tent is not attached, it will not wet the inside tent. However, frosting of the tent will solve the internal problems. In this case, if you get up early, it will snow in the tent :-( Of course, the weather is nice and comfortable without an outside account.

There are also some ropes on the fire tent, which are Reinforced tents. Usually they don't need to be pulled if there is no strong wind. They can rest easy. They also use ground pegs. The ropes are pulled evenly. When you get up in the morning, if it's sunny, don't put the tent in right away, and Let it dry a bit. If it rains, be sure to spread it out to dry when you come home, otherwise it will get moldy. When you receive the tent, please remove the outer tent first. After pulling out the nails of the inner tent, do not rush to remove the tent Pole. Open the door, lift the tent and shake, pour out the soil inside, and place it on the ground. Take one head off, then you can level the tent, push the tent pole from one end and fold it up, then Put the inner and outer tents back in the bag and don't lose the ground pegs. Rory talked a lot, hope it helps.



Guangzhou JOY Inflatable Limited highlighted the need to foster a human openness to technological innovation.
Dedicated to bringing you professional inflatable theme park solutions and related products – from kids water park to inflatable park, Guangzhou JOY Inflatable Limited is your inflatable theme park helper. Visit us at JOY Inflatable.
inflatable theme park are raising the stakes of social marketing, but they also ease the sales process by providing ways for kids water park to effectively interact with customers.
But we do think that reckoning with supply chains of inflatable theme park is a really important step. Even super simple switches in material, or sourcing, or shipping, or worker benefits seems like good place to start.
Custom message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...