Construction of fire inflatable tents

Analyze the physical structure of the fire tent to see its function and durability. The frame is designed using the principle of structural mechanics, and the airbag is inflated to form a rigid column by using the gas pressure characteristics, and the skeleton of the tent is supported by organic combination. With the strength of the skeleton material used, the bearing capacity of the tent can be set; the performance of the polymer coating determines the service life of the frame and the maintenance of the rigidity of the frame; and the rationality of the air chamber setting, then Determines the support limit of this frame.

The fire-fighting tent is relatively large and can accommodate many people in one tent. This kind of tent is used in places where there are many groups of people, and is generally used for emergency rescue. So, when we buy tents, the most important thing is the quality and construction of tents. Is it safe to accommodate so many people in one tent? Is it easy to set up a fire inflatable tent?

Compared with ordinary metal bracket tents, inflatable tents have incomparable advantages, light weight and small size, which have the advantages that ordinary metal bracket tents do not have in transportation.

When setting up a tent, try to fix the tent on the ground with camp nails. Although most tents can be built independently without camp nails, the power of nature is not enough. It is limited, don't think that there is someone in the tent or it's okay to hold it with a backpack. According to the author's experience, when nature shows its power, the tent runs like the people inside! Make sure your tent is well ventilated! Because when we sleep at night, the sweat and exhalation of the body will increase the humidity of the air in the tent. Assuming that four people sleep in a tent, up to 1 liter of water can accumulate in one night. If the tent is not well The ventilation of the four people must be wet in the morning.

Before closing the tent, make sure nothing or debris is left inside.

When combining camp pillars, you can combine them one by one, and do not combine them by throwing them away. When dismantling the camp post, start from the middle, and then dismantle both ends, so as to maintain the elasticity of the elastic rope core.

When collecting the bill, do not fold the inner tent and the rain cloth in the same way, this will accelerate the damage to the fabric in the crease, and fold it in a different way each time.

Inflatable tent - suture glue treatment

When making sutures waterproof, we must first determine whether we need to do waterproofing, because not every suture needs to use suture glue Treatment, usually exposed to rainwater, only the stitches on the puddle need stitch glue, so the stitches of the rain cloth and ground cloth must be waterproof. As for the inner wall of the inner tent, because it will not directly contact the rain, Don't be busy

Repair of inflatable tents

After the tent has been used for many times, there must be some damaged parts, usually there are damaged parts, most of which are leaking seams, Holes in the rain cloth and water seepage in the ground cloth. These damages can all be repaired. In addition, the cracks and damages of the battalion pillars are usually directly replaced with new battalion pillars, so they will not be specifically described here. The following is a brief introduction to the treatment of suture glue: