Buy jump Air bag wholesale for skiing

Tubing jumps Inflatable Airpit Bag For Adventure Park. The size is 6.25 meter long by 4.58 meter width and 1.2 meter high(all the measure of our 3 D design are in centimeter) but any size can be customized if you have requirement. 

The Inflatable Airpit Bag is sewing structures, it has many air inlets around the Airpit Bag  ,after connected by air blower,the Airpit Bag  will unfold itself while being inflated,about 2-3 minutes,It can be fully set up. And pls keep one air blower to inflate all the time during the work . 

You can set up your Air bag in Anytime and anywhere. Set it outside for your adventure park , bike jump , rock climbing or inside your trampoline park ,gym facility. 

b

We research and develop the Inflatable Stunt Bag Jump Stunt Trampoline foam pit airbag  – A saving cost , durable airbag designed to cope with multiple simultaneous landings from up to 8 meters above ground level. Today the foam pit airbag is the most durable and health, reliable and safe alternative compare with traditional foam pits on the market for trampoline park .Guangzhou Joy Inflatable Limited is using the 0.55mm and 0.9mm Plato brand materials which is fireproof and the most advanced production techniques available the inflatable stunt air bag is meeting trampoline parks across the globe's standard .

                           

1. Safety and durability

The jump Airpit bag has 2 chambers: the bottom chamber is firm (maintaining the stability) while the upper one is soft.

 

 

Our foam pit airbag features as many as 4 air pillars per m2 ! The interconnected air -pillars absorb impact individually and uniformly offering uninstalled safety and maximum durability 

                           

2. Net hole 

We usually make at least two net holes for each piece form pit airbag for the customer to adjust the inside air . If you want more soft you can open the net hole as same as the picture . But if you want enough air inside you can close the net hole .（open all , cover 1/3; 1/2; all are available）

                           

3. Double cover more durble

We made double cover for the inflatable airpit bag, the upper cover is dismountable .When the cover was be damaged  so you just need replace the the upper cover .

                           

4. Reinforment

Extra webbing reinforced strip on all the stress points, interior panels and the cover

athe apron of our air bag will connect with the air bag elastic string 

VS

not the elastic string 

1. Firstly Insert the Nozzle of the blower into the blower pipe and then tight alternative air inlet with a rope.
   2.Turn on the blower start to inflate the airt bag .
   3.When the air bag was be built up in the foam pit and check every stake was be inflated or not .
   4.After the air bag was be inflated perfectly ,pls turn off the blower to deflate and then put the cover on the stakes .
   5.Spread out and flatten the cover and the last turn on the blower again (Keep the blower work all the time during the use )
   

Something the customer not sure about the posistion of the blower vent so we will make the blower vent in the four sides .You can choose the one blower vent to connect the blower to inflate the air bag , and put the others blower vent inside as same as the video.

1、free design

2、free repair kit and the after-sale service