Single Lane Inflatable Water Slip N Slide with Pool

 The inflatable water slip N slide is 25 m long and 2 m width just with 1 lane (of course it can be single laneas well as triple ) is made by 0.9mm PVC tarpaulin which is strong tension. The inflatable long slip and slide are airtight only once inflate by the air pump when the slide was be inflated 90% air inside you can turn off the air pump.

Depend upon this tyle inflatable city water slide, it must be built upon a slope with 15-30 angles, both street, and hill, so that people can freely slide to the end with water. Climb up, tumble down, shake yourself off and try again, once you are successful and reach the top of the city slide you are ready to slide down. Of course, you can add some soap foam on the slide to make it more smooth and Slippery or all kinds of swim rings to push you fast to slide. In addition, when people are playing, you need to spray water with the water pipe. All the inflatable slides manufactured by Guangzhou Joy Inflatable Limited are so much fun for kids as well as big kids wanting to have a blast. All of our inflatable slides are suitable for a variety of ages.           

All kinds outside activities.  

it must be built upon a slipe with 15-30 angles,both street, and hill 

The slip n slide is a classic backyard activity. That’s why we offer commercial slip n slides for summer camps, resorts, and homes that take this time-honored concept and we put our own adventurous twist on it. 

                           

Fast 

With an ultra-slippery vinyl surface, all you have to do is add water and soap foam  get ready to roar down the slide.

                           

More safe  

The inflatable slip and slide water slide is with inflatable bottom .It is more safe and fast for you slide to the end .

                           

With swimming pool at the end 

People can slide in the swimming pool .The end swimming pool can store water so the water cyclic utilization to save the water . 

Air tight technology: Welder by Miller machine in high steam and reinforcement at joint part .

Features : Only work inflate by the air pump 

Inflatable bottom 

VS

Without 

  with drain hole easy drain the water out of the slide from the swimming pool 

VS

Without the drain hole 

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the slide on the ground .
5.Connect the air inlet of inflatable slide inflate it .When the slide was be built up on the ground with 90% air inside you can turn off the air pump .
6.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design 
2、free repair kit and After sale-service