JOY Inflatable Commercial Slip and Slide for Sale W-109 Commercial Slip and Slide for Salefor Sale

Product details of the commercial slip and slide for sale

Product Description

JOY Inflatable commercial slip and slide for sale is made of well-selected materials that conform to strict industry standards. Owning to its superior quality and reasonable price,our commercial slip and slide for sale has met with warm reception and quick sale in the market. Guangzhou JOY Inflatable Limited has improved its ability to provide competitive commercial slip and slide for sale, and facilitates its transformation into a modern provider.

This Slip 'N Slide is crafted from durable PVC tarpaulin, a highly resilient material. It features two connected slides—one measuring 28 meters and the other 28 meters—designed for an exhilarating ride that sends users straight into the lake, eliminating the need for a pool at the end.

The slide requires continuous inflation with blowers to maintain its structure. We provide spare materials identical to those used in city slides, along with high-strength PVC special glue for repairs.

Ideal for urban settings, this inflatable slide can be installed on streets or hillsides with a slope of 15-30°, ensuring a smooth and thrilling ride. To enhance the sliding experience, users can apply soap foam and continuously spray water with a hose, making it even more fun and entertaining.

All kinds outside activities.  

it must be built up on a slipe with 15-30 angles ,both street and hill 

The slip n slide is a classic backyard activity. That’s why we offer commercial slip n slides for summer camps, resorts and homes that take this time-honored concept and we put our own adventurous twist on it. 

                           

Fastly slide 

With an ultra-slippery tarpaulin surface, all you have to do is add water and soap studs  get ready to slide down the slide.

                           

Anchor on the both sides tube

OWe will sew a lot of tthe anchors on the both sides tube of the slip slide for the customer to attach the water pipe or spray . 

                           

blower pipe 

We will make the blower pipe in about 20cm in diameter according to our blower . In order for your convenience to connect the power we will make the one blower pipe each 2 meter  .You can put the extra  blower pipe in the hole .

Sewing machine technology: double stitching everywhere and strong reinforcement at joint part .

Features : work with the blower all the time

With inflatable bottom

VS

single layer bottom

                                      with drain hole easy drain                          you  can open it you can drain the water out of the slide 

VS

Without the drain hole 

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the slide on the ground .
5.Connect the air inlet of inflatable slide and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable slide will be inflated within 2-5 minutes (depend the size of the slide ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design 
2、free repair kit and After sale-service 

Company Feature

• To ensure fast and timely customer service, our company has built a perfect after-sales service system.
• Unique geographical advantages and abundant social resources create good conditions for JOY Inflatable's development.
• JOY Inflatable has been running the business for nearly years since We are able to meet the diversified needs of customers based on many years of production experience.
• JOY Inflatable's product network covers all provinces and regions of the country. The products are also exported to Europe, America, Africa and Southeast Asia.
If you are interested in our products, please contact us. We are dedicated to providing you with excellent and the most professional services.