Latest inflatable blow up water slide distributor for outdoor

Company Advantages
1. JOY Inflatable inflatable blow up water slide comprises of the materials which are readily available in the market.
2. In the inflatable blow up water slide industry, JOY Inflatable now is a leading manufacturer in the market. Ou products are of high durability and stability
3. The product undergoes strict QC procedures including process control, random inspection, and routine inspection. These inspections prove to be helpful to the quality of the product. We can print your logo, slogan or other information you ask for
4. The product is believed to function timelessly with improved reliability and is expected to serve users for a long time without any defects. Our products are designed by the first-rate designers

All kinds outside activities.  

it must be built up on a slipe with 15-30 angles ,both street and hill 

The slip n slide is a classic backyard activity. That’s why we offer commercial slip n slides for summer camps, resorts and homes that take this time-honored concept and we put our own adventurous twist on it. 

Sewing machine technology: double stitching everywhere and strong reinforcement at joint part .

Features : work with the blower all the time

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the slide on the ground .
5.Connect the air inlet of inflatable slide and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable slide will be inflated within 2-5 minutes (depend the size of the slide ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design 
2、free repair kit and After sale-service 

Company Features
1. Owing to the efforts of our hard working staff, there is a space available for JOY Inflatable in inflatable blow up water slide industry. We have a skilled workforce. The workers have the skills to make their job done. They won’t waste hours fumbling around trying to figure out processes that they should already know, which brings efficiency and increased production.
2. We have excellent design professionals. Most of them have worked in this industry over the years. This industry knowledge allows them to create the best design for customers' product requirements.
3. We own a manufacturing plant that is near to the material source and consumer market, which greatly contributes to reducing and saving transportation costs. Guangzhou JOY Inflatable Limited is a company who sticks to customer first always. Contact!