JOY inflatable quality big inflatable tent vendor for children

Company Advantages
1. pop up medical tent has a broad development prospect and application in big inflatable tent field due to its outstanding design and high-performance materials. The high quality materials of PVC are adopted to manufacture products
2. This product has many excellent properties and has been widely used in the market. All the materials we used are based on the international standard
3. The product will not get aging easily. Its high strength material has excellent tension force and can be used for a long time. We adopt environmental protection and and non-toxic materials

All kinds outside activities.  1.For medical event.  2. emergency .   3.military

heat welding machine : High precision heat welding machine and elaborated welding work for the water park  .we can perfectly seal all the material pieces together into any reasonable inflatables, and heat weld all of our airtight inflatables with top quality standard with high efficiency

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the tent on the ground .
5.Connect the air inlet of inflatable tent and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable tent will be inflated within 10-30 minutes (depend the size of the tent ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free to desige fee.
2、free repair material and repair video.

Company Features
1. Guangzhou JOY Inflatable Limited has taken dominance in the domestic market when it comes to the R&D and manufacture of pop up medical tent .
2. Advanced equipment of Guangzhou JOY Inflatable Limited guarantees the company's continuous and stable supply capability of big inflatable tent .
3. We value sustainability in our development. We will work to advance low-carbon and responsible investing by facilitating the provision of socially responsible products to the market.