JOY inflatable Bulk buy inflatable stunt bag manufacturers for outdoor activities

This is Indoor Foam Pit Inflatable Airbag for 8m High Trampoline Park Jump we made it for the Puerto Rico customer with 7.3m length ; 6.1m width and 1.2m high to suit the client trampoline park  .  When some one lands on the Inflatable pillow just enough air escapes via speical air holes from the top layer to absorb the fall. An extra layer on the top and sides of the cushions protects the pillow against defects.The inflatable air bag is for stunt falling from 3-8 m high platform .Our air bags are with extra skirts with velcro around of top sheet cover. It can be connected with your trampoline to avoid any gap between the trampoline and Airbag.

b

We research and develop the Inflatable Stunt Bag Jump Stunt Trampoline foam pit airbag  – A saving cost , durable airbag designed to cope with multiple simultaneous landings from up to 8 meters above ground level. Today the foam pit airbag is the most durable and health, reliable and safe alternative compare with traditional foam pits on the market for trampoline park .Guangzhou Joy Inflatable Limited is using the 0.55mm and 0.9mm Plato brand materials which is fireproof and the most advanced production techniques available the inflatable stunt air bag is meeting trampoline parks across the globe's standard .

                           

1. Customized

 We can make the 3D design if you can tell us your requriement . Size ,design and the color can be customized . Any logo can be printed on the top sheet .

 

                           

2. Net hole 

We usually make at least two net holes for each piece form pit airbag for the customer to adjust the inside air . If you want more soft you can open the net hole as same as the picture . But if you want enough air inside you can close the net hole .（open all , cover 1/3; 1/2; all are available）

                           

3. Elastic rope

we will use the strong elastic ropes to attach the top cover sheet with the air bag  ,it will be very strong and not easy to be broken

                           

4. Reinforment

Extra webbing reinforced strip on all the stress points, interior panels and the cover

athe apron of our air bag will connect with the air bag elastic string 

VS

not the elastic string 

1. Firstly Insert the Nozzle of the blower into the blower pipe and then tight alternative air inlet with a rope.
   2.Turn on the blower start to inflate the airt bag .
   3.When the air bag was be built up in the foam pit and check every stake was be inflated or not .
   4.After the air bag was be inflated perfectly ,pls turn off the blower to deflate and then put the cover on the stakes .
   5.Spread out and flatten the cover and the last turn on the blower again (Keep the blower work all the time during the use )
   

Something the customer not sure about the posistion of the blower vent so we will make the blower vent in the four sides .You can choose the one blower vent to connect the blower to inflate the air bag , and put the others blower vent inside as same as the video.

1、free design

2、free repair kit and the after-sale service