Selection of outdoor inflatable tents | Precautions for the use of outdoor inflatable tents

The following factors should be considered when choosing an outdoor inflatable tent:

Easy to carry

It is more convenient for backpackers to use traditional tents. Once disassembled, he can put it directly into the backpack. Self-driving families have the option to quickly open the tent. After collection, it is round and suitable for storage in the trunk.

The outer tent is waterproof and the inner tent is ventilated, two essential points for high-quality tents.

Exterior tarpaulins

The most common form of coating is a polyurethane coating. Thickness and craftsmanship determine the water resistance of the factory. The coating thickness is expressed in mm. The PU800 coating shows that the coating will not leak under a static water column of 800mm.

Pu800 paint can prevent light to moderate rain; pu1000-1200 paint can prevent moderate to heavy rain; paint above 1500mm can be used in different environments.

In addition to polyurethane coatings, foreign textile companies have also developed some new high-performance coatings. These coatings are waterproof and breathable. They are called breathable fabrics, and outside rainwater cannot pass through the coating. The expelled water vapor can permeate to the outside world.

Inner tent

The inner tent of the low-end tent is made of nylon cloth or ordinary gauze. The inner tent of the middle and high-end tents is made of high-density gauze to ensure good air permeability and anti-mosquito function.

Strong strength and good resilience

Material: currently the better rods are carbon rods, down to aluminum alloys, down to fiberglass, and finally iron rods (except for the troops almost Useless).

Number of sets: The wind resistance of the tent is not only related to the material and diameter of the pole, but also to the number of sets of poles. Generally speaking, the more pole sets, the better the wind resistance. For example, 2 sets of ordinary aluminum poles in the tent can withstand strong winds of about 7-8. The wind resistance of the three sets of aluminum poles is about 9 grades. The tent has 3-4 sets of 7075 aluminum poles, which can be used in a snowstorm environment around level 11.

The tent should be waterproof and wear-resistant

The commonly used substrates are polyethylene cloth and waterproof polyester cloth. The middle and low-end tents use PE tents, and the middle and high-end tents use waterproof polyester cloth. Polyethylene is a polyethylene material that resembles a low-grade snakeskin bag. The actual tents are made of polyethylene with waterproof membranes on both sides, including a large number of export tents.

The bottom of the account is in contact with the ground and is easily scratched by debris such as gravel, grass roots and branches. Before camping, the hard objects on the ground must be cleaned, or the surface must be covered with tents and cloths as a protective layer. Tent floor cloth generally uses 420D wear-resistant Oxford cloth.

The front and rear double doors or tents are more conducive to ventilation.

At this point, the new quick opening tents are better designed and more ventilated.

Well designed

Need to have enough nails and wind rope. Accessories such as bags, nails and ropes can also affect the use of the tent. The bag should be durable and the number of nails should be sufficient. The strength of the aluminum nails should be large, and the tent should be fixed with ropes.

The use and precautions of inflatable tents.

The inflatable tent is very easy to use. Whether it is a large tent or a small tent, it can be erected and dismantled by 1-2 people. A high-pressure air pump with an inflatable tent can be set up in 15 minutes. The appearance is atmospheric, the product itself is creative and high-end, so it is suitable for various outdoor activities, life and other aspects.

First, let's talk about how to build it. First disassemble the packaged inflatable tent, then lay the floor, and then take out the accessories, such as: electric air pump, edge fixer, drawstring, maintenance kit, etc. When ready, use the air pump connector to find the inflation valve on the air column of the inflatable tent, connect the air valve, and turn on the electric air pump switch to inflate the inflatable tent until the inflatable tent is completely standing.

Two inflation valves, please check whether the other inflation valve is tightened when inflating, otherwise it will be inflated and deflated. In the case of strong wind, the inflatable tent must be fixed with nails and ropes.

The structure is simple and the disassembly is not difficult. First remove the zipper rope fixing the inflatable tent, then loosen the inflation valve of the inflatable tent and deflate naturally until the tent collapses.

Due to the deflation of natural gas and the difficulty in discharging a large amount of gas, the deflation valve of the inflatable tent should be able to come in handy at this time. come out. The inflatable tent is folded and packed.

Of course, inflatable tents have many precautions. Taking these precautions to heart is a better way to extend the life of your inflatable tent. Before building an inflatable tent, the terrain must be carefully measured. No boulders, logs and weathering stones are allowed above the camp.

Do not set up tents near river banks and dry riverbeds during the rainy season. In addition, in order to prevent lightning strikes, do not set up tents on the top of the mountain or in the open air; when installing on mud or sand, you can dig trenches around the tent to ensure that the ground inside the tent is dry.