quality large inflatable tent series for outdoor

Tunnel shape inflatable event tents widely used as party ,concert , Sport, advertising , exhibition , wedding tent,  warehouse tent, and so on.

Inflatable air tent can be made any size as you need, for example, we can make party tent for tens to thousand people. All of our inflatable marquee is very safe, even tent is broken by accident, it will fall down very slowly, so people inside have enough time to get out, and also you can repair it during this time. Our Inflatable tent is with Intelligent Air Pump so it  will automatically inflated air when the air pressure is low,automatically stop charging after the pressure is full enough. Automatically exhaust: the air pressure becomes larger due to thermal expansion under the sun, it can induce automatic pressure relief exhaust.

All kinds outside activities.  1.For party event.  2. concert .  3.Sport .  4.exhibition.

                           

ventilation holes 

we have design ventilation holes on the tent, so air condition duct can be pass through the tent, no matter in cold or hot weather, people can have a comfortable temperature in side the tent .

                           

Character

Inflatable airtight tent double made of strong 0.6mm pvc tarpaulin, which is simple two layers structured, high tensile strength, rigid, stable, wind resist, UV cut, water proof and so on. It can resist wind of 17m/s and can be well used from -35ºCto +65ºC. Thermoform heat sealed technique to assure 100% safty for your variety usages.

                           

Safety

2. If the inflatable tent's pressure is too soft, arrange for all people evacuation ,and then to check there if there are leaks and torn holes.

3.During the tent inflating if you find the tent can’t stand up by itself  please in virtue of manpower to help it stand up .

Inflatable airtight tents does not need constant blowers ，Automatically exhaust or inflate according to the rise and fall of air pressure .

If the inflatable tent's pressure is too soft, arrange for all people evacuation ,and then to check there if there are leaks and torn holes.

3.During the tent inflating if you find the tent can’t stand up by itself  please in virtue of manpower to help it stand up .

If the inflatable tent's pressure is too soft, arrange for all people evacuation ,and then to check there if there are leaks and torn holes.

3.During the tent inflating if you find the tent can’t stand up by itself  please in virtue of manpower to help it stand up .

2. If the inflatable tent's pressure is too soft, arrange for all people evacuation ,and then to check there if there are leaks and torn holes.

3.During the tent inflating if you find the tent can’t stand up by itself  please in virtue of manpower to help it stand up .

2. If the inflatable tent's pressure is too soft, arrange for all people evacuation ,and then to check there if there are leaks and torn holes.

3.During the tent inflating if you find the tent can’t stand up by itself  please in virtue of manpower to help it stand up .

2. If the inflatable tent's pressure is too soft, arrange for all people evacuation ,and then to check there if there are leaks and torn holes.

3.During the tent inflating if you find the tent can’t stand up by itself  please in virtue of manpower to help it stand up .

heat welding machine : High precision heat welding machine and elaborated welding work for the water park  .we can perfectly seal all the material pieces together into any reasonable inflatables, and heat weld all of our airtight inflatables with top quality standard with high efficiency 

handles, anchor rings are welded  

VS

handles, anchor rings stick with glue

pressure; Air relief valve; Intake valve

VS

only with intake valve when Sharp differences in temperature the product will be easy to burst

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the tent on the ground .
5.Connect the air inlet of inflatable tent and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable tent will be inflated within 10-30 minutes (depend the size of the tent ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design 

2、free repair kit and After-sale service