Jumper inflatable bounce house factory price for child

Company Advantages
1. JOY inflatable inflatable bounce house is designed using modern technology in conformity with the set industry standards. Our products are suitable for kids who are from 3 to 7 years old
2. Guangzhou JOY Inflatable Limited's sophisticated manufacturing capabilities and technical selling point make Guangzhou JOY Inflatable Limited's leading sale performance. We adopt environmental protection and and non-toxic materials
3. With the advantage of inflatable tent house , in these decades, a lot of costumers have made repeat purchases of inflatable bounce house. What's more, our products are anti UV
4. inflatable bounce house has been praised due to its inflatable tent house . All our products conform to EN14960 standard
5. On account of multiple advanced technology, inflatable bounce house now stands out in this industry. Our products feature unique appearance

All kinds outside activities

1.For party event     2. wedding       3. As a store       4.exhibition 

All sewing inflatable products are made by high precision machines and using unique 12 in one waterproof nylon threads . We use double stitching for both inside and outside of the products and quadruple stitching for the force loading bottom . For each corner and connection, there are reinforce straps to make sure the product are safe enough for all wind and tension . The length of each single sewing needle is 3mm-8mm

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the tent on the ground .
5.Connect the air inlet of inflatable tent and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable tent will be inflated within 10-30 minutes (depend the size of the tent ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design 

2、free repair kit and After-Sale service 

Company Features
1. Guangzhou JOY Inflatable Limited is invested by lots of money and equipped with many talents.
2. Our technology takes the lead in the industry of inflatable bounce house.
3. Guangzhou JOY Inflatable Limited intends to develop into the world's leading manufacturer. Call!