JOY inflatable seal giant dome tent customized for outdoor

Company Advantages
1. JOY inflatable blow up tents for sale is designed with high technology. Adopting the brand new CAD lofting software which is especially for inflatable products, the design drawing comes out within minutes.
2. This product is somewhat flame retardant. Its fabric is assessed on a range of criteria to ensure the strength of the fire retardant properties.
3. The product is completely safe and harmless. It is made by food-grade parts, hence, no chemical substances will release during the water treatment process.
4. It has positive significance and broad market prospects.
5. It is highly recommended by the targeted customers.

All kinds outside activities.  1.For party event.  2. camping .  3.hotel .  4.exhibition.

heat welding machine : High precision heat welding machine and elaborated welding work for the water park  .we can perfectly seal all the material pieces together into any reasonable inflatables, and heat weld all of our airtight inflatables with top quality standard with high efficiency 

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the tent on the ground .
5.Connect the air inlet of inflatable tent and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable tent will be inflated within 10-30 minutes (depend the size of the tent ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design 

2、free repair kit and After-sale service 

Company Features
1. Guangzhou JOY Inflatable Limited has achieved accelerated development in giant dome tent industry.
2. Guangzhou JOY Inflatable Limited has showed a new willingness to keep pace with the increasing pace of the blow up tents for sale world.
3. JOY Inflatable aims to create the first national brand! Contact us! We will lead the JOY inflatable brand to become a famous go outdoors blow up tent manufacturer brand. Contact us!