JOY inflatable military army medical tent inquire now for children

Company Advantages
1. The offered JOY inflatable army medical tent is designed under the guidance of highly skilled designers.
2. It is designed to have a long lifespan to achieve cost-effectiveness.
3. The product has attracted much attention and is going to be more used by people from various fields.
4. Due to the above advantages, the product has a broader and wider market.

All kinds outside activities.  1.For medical event.  2. emergency .   3.military

heat welding machine : High precision heat welding machine and elaborated welding work for the water park  .we can perfectly seal all the material pieces together into any reasonable inflatables, and heat weld all of our airtight inflatables with top quality standard with high efficiency

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the tent on the ground .
5.Connect the air inlet of inflatable tent and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable tent will be inflated within 10-30 minutes (depend the size of the tent ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design.
2、free repair material and repair video.

Company Features
1. Guangzhou JOY Inflatable Limited is a high-tech company that is oriented towardsarmy medical tent industry.
2. At present, most of the inflatable medical tent series produced by us are original products in China.
3. Quality is always the solid foundation of Guangzhou JOY Inflatable Limited's long-term development. Ask online! The culture of JOY inflatable is characterized by an open and informal working atmosphere. Ask online! To promote our better cooperation, Guangzhou JOY Inflatable Limited is willing to do more for our customers. Ask online!