JOY inflatable large igloo dome tent series for outdoor

Company Advantages
1. Strict quality control is carried through the production of JOY inflatable inflatable dome tent for sale . It has to pass the inflatable test by means of putting it in a pool for at least 24 hours.
2. The product has been improved with additional functionality to enable more function-rich clients.
3. 'The product is so light and easy to move, the rooms can be reconfigured quickly with very little effort', said one of the hotel owners.
4. This product is a good way to display products in retail. It is a sure way of bringing an exhibition to life.

All kinds outside activities.  1.For party event.  2. camping .  3.hotel .  4.exhibition.

heat welding machine : High precision heat welding machine and elaborated welding work for the water park  .we can perfectly seal all the material pieces together into any reasonable inflatables, and heat weld all of our airtight inflatables with top quality standard with high efficiency 

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the tent on the ground .
5.Connect the air inlet of inflatable tent and the outlet of air pump
6.When the air pump switched on, inflatable tent will be inflated within 30 minutes (depend the size of the tent ).Because the tent is sealed so when the tent was be set up on the ground pls turn off the air pump
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design 

2、free repair kit and After-sale service 

Company Features
1. With advanced technology and large scale factory, Guangzhou JOY Inflatable Limited has grown to be stronger and stronger in igloo dome tent industry.
2. Our project management team is the asset of our company. With their years of experience, they can provide a combination of development and manufacturing solutions in the process of managing our projects.
3. JOY inflatable looks forward to working with you by providing our fantastic blow up dome tent . Welcome to visit our factory! Guangzhou JOY Inflatable Limited aims to enhance the brand's reputation and promote customer development. Welcome to visit our factory! JOY inflatable will persistently provide superior inflatable dome tent . Welcome to visit our factory! Guangzhou JOY Inflatable Limited constantly highlight the need for high-quality support. Welcome to visit our factory!