Inflatable Air Tent

Joyinflatable Brand Inflatable Air Tent 8 m length and 4 m width mix with the 0.4mm white color pvc tarpaulin and 0.8mm transparent pvc . 

We made this inflatable marquee for our Belgium customer to cover his swimming pool to protect the Sun , you can swim in the shade . Slant of roof is easy to drain away the water . 

                           

Technology

Welder by Miller machine in high welder steam and we all reinforcemnt for all our products  so the item have good airtightness and more durable .

Feature : only once inflate by the air pump 

                           

Anchor rings 

 For parts like anchor rings for the customer fix the tent on the ground we use the big high frequency welding machine to weld on the  products instead of glue on by hand.The partsand the main body are fused together so the quality is very stable and will not peel off.

                           

Air Relief valve

We install high quality air relief valve madein on our inflatable 

marquee, so the items can release air to a safety level automatically 

when it's getting hot in the noon .

Sewing machine for Cube silver tent and high-frequency heat combined for dome tent with the process of production, gas column with PVC double-sided coated cloth, tarpaulin waterproof, anti-ultraviolet materials, with fast forming, high strength, fire, mildew, anti-ultraviolet, moisture Etc. Tent for the inflatable tent, tent frame for the gas column structure, compared with the general metal bracket tent, with a light, folded after the small size, easy to carry and so on.

How to install  the inflatable tent ?                                                                                                                                                                            

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the tent on the ground .
5.Connect the air inlet of inflatable tent and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable tent will be inflated within 10-30 minutes (depend the size of the tent ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design

2、free repair kit and the After-sale service