JOY inflatable jump inflatable floating water park wholesale for kids

Company Advantages
1. JOY inflatable outdoor inflatable water park has to go through both physical and mechanical properties tests including its stiffness, thickness, tear resistance, and inflatable performance.
2. The product comes with assured quality, which has been proven by international certifications.
3. It is thoroughly checked by the experts in order to ensure reliable performance without any flaws.
4. The stable quality supplier chain is a strong guarantee for the quality of Guangzhou JOY Inflatable Limited's products.

Reinforcement. We make reinforcements at every weak points like welding seams

Features : only once inflate by the air pump .

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the slide  on the ground .
5.Connect the air inlet of inflatable slide and the outlet of air pump tightly.
6.When the blower switched on, inflatable slide and the support will be inflated within 2 minutes (depend the size  ).
7.Connenct the water slide and the support . and then install it with the yacht .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design 
2、free repair kit and After sale-service 

Company Features
1. JOY inflatable is engaged in manufacturing the high quality outdoor inflatable water park and devoting ourselves into offering the best fun water parks outdoor water park .
2. Our company is slated as one of the top enterprises by the Reputation Institute in China. We are thought as a credible company because it upholds ethical business activities all the time no matter from the perspective of products or customers' service.
3. Guangzhou JOY Inflatable Limited is responsible and very concerned about the needs of customers. Get an offer! JOY Inflatable can provide far more value for you than other brands. Get an offer!