JOY inflatable inflatable party tent customized for kids

Company Advantages
1. JOY inflatable go outdoors blow up tent is manufactured through the following steps: CAD design, project approval, materials selection, cutting, parts machining, drying, grinding, painting, varnishing, etc.
2. The product is safe and reliable with great functions.
3. This product does not go to waste once it has become old. Rather, it is recycled. The metals, wood, and fibers can be used as a fuel source or they can be recycled and used in other appliances.
4. With the help of this product, the production can be finished at a faster and smoother manner, which can ensure project completion in a given deadline.

All kinds outside activities.  1.For party event.  2. camping .  3.hotel .  4.exhibition.

heat welding machine : High precision heat welding machine and elaborated welding work for the water park  .we can perfectly seal all the material pieces together into any reasonable inflatables, and heat weld all of our airtight inflatables with top quality standard with high efficiency 

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the tent on the ground .
5.Connect the air inlet of inflatable tent and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable tent will be inflated within 10-30 minutes (depend the size of the tent ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design 

2、free repair kit and After-sale service 

Company Features
1. Guangzhou JOY Inflatable Limited is in a very competitive position in the domestic market. We offer and customize outstanding quality go outdoors blow up tent.
2. We have our design professionals. They are highly experienced and committed to providing our customers with the best designs that optimize efficiency and minimize costs.
3. We always hold on to the principle: consistently optimizing the products under an awareness of anxiety. We will defeat our competitors by providing outstanding product quality. Get info! We are fully prepared to serve customers with inflatable party tent .