JOY inflatable inflatable bounce house personalized for outdoor

Company Advantages
1. JOY inflatable inflatable bounce house is outstanding for its unique design.
2. This product is weather resistant, including resistance to UV degradation and retention of physical properties after long periods of sunlight exposure.
3. We heard back from our customers who had this product to say: it's amazing because it withstands really strong wind with ease!
4. This product is beneficial and extremely helpful in promoting brand awareness. It's not only cheaper than the TV channel advertisement, but it can also keep the brand visible and known for a longer period of time.

All kinds outside activities

1.For party event     2. wedding       3. As a store       4.exhibition 

All sewing inflatable products are made by high precision machines and using unique 12 in one waterproof nylon threads . We use double stitching for both inside and outside of the products and quadruple stitching for the force loading bottom . For each corner and connection, there are reinforce straps to make sure the product are safe enough for all wind and tension . The length of each single sewing needle is 3mm-8mm

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the tent on the ground .
5.Connect the air inlet of inflatable tent and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable tent will be inflated within 10-30 minutes (depend the size of the tent ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design 

2、free repair kit and After-Sale service 

Company Features
1. Guangzhou JOY Inflatable Limited is known for its high quality inflatable bounce house.
2. The large production base greatly increase Guangzhou JOY Inflatable Limited ' production capacity.
3. Guangzhou JOY Inflatable Limited’s vision is to achieve first-rate brand and become a competitive Inflatable cube tent enterprise. Inquire online! Guangzhou JOY Inflatable Limited aims to become an internationally competitive inflatable house tent maker in the future. Inquire online! Guangzhou JOY Inflatable Limited's corporate culture needs continuous innovation and development on the basis of adhering to inflatable tent house . Inquire online!