JOY inflatable blow up slip n slide series for outdoor

Company Advantages
1. JOY inflatable backyard water slide is manufactured from upper material and technique.
2. blow up slip n slide is widely polulor around the world.
3. Guangzhou JOY Inflatable Limited has a perfect international sales network, providing technical support and the best cost-effective products.
4. Guangzhou JOY Inflatable Limited has won high attention and praise from blow up slip n slide industry and market.

All kinds outside activities.  

everywhere from the backyard to a resort or campground , hillside  b

Sewing machine technology: double stitching everywhere and strong reinforcement at joint part .

Features : work with the blower all the time

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the tent on the ground .
5.Connect the air inlet of inflatable tent and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable tent will be inflated within 10-30 minutes (depend the size of the tent ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design
2、free repair kit and After-sale Service 

Company Features
1. Since its creation, Guangzhou JOY Inflatable Limited has been a professional manufacturer in the field of backyard water slide production.
2. We have set up a capable R&D team. They draw on their years of industry R&D knowledge to continuously improve product performance and research new technologies.
3. Our company bears social responsibilities. The physical plant of our factory presents some of the easiest, most cost-efficient ways to reduce waste. To create a sustainable society, we have developed and implemented a strategy to guide our production activities to greener and more environmental-friendly way. We take "Customer First and Continual Improvement" as the company's tenet. We have established a customer-centric team who specially solve problems, such as responding to customers' feedback, giving advice, knowing their concerns, and communicating with other teams to make the problems be solved. We have formulated policies to support our sustainability work. We will ensure that high-quality production and safe working conditions across the value chain.