JOY inflatable blow up slip n slide customized for kids

Company Advantages
1. There are higher requirements in terms of materials used for blow up slip n slide .
2. This product is absolutely a smart accessory to the mobile phone owners, for the fact that it greatly helps increase convenience. We use high quality and high standard materials
3. The product features remarkable loading strength. Its materials, mainly metals, have desired mechanical properties to endure heavy-duty use. Our products are suitable for kids who are from 3 to 7 years old
4. This super soft product will be a new update that improve the sleep and work well with bedroom decorations. Our products enjoy 3-5 years warranty
5. The product is not prone to deform. The tempering process has eliminated the internal stress of work blank to prevent or reduce any deformation. Our products are waterproof and flame-retardant

All kinds outside activities.  

it must be built up on a slipe with 15-30 angles ,both street and hill 

The slip n slide is a classic backyard activity. That’s why we offer commercial slip n slides for summer camps, resorts and homes that take this time-honored concept and we put our own adventurous twist on it. 

Sewing machine technology: double stitching everywhere and strong reinforcement at joint part .

Features : work with the blower all the time

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the slide on the ground .
5.Connect the air inlet of inflatable slide and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable slide will be inflated within 2-5 minutes (depend the size of the slide ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design 
2、free repair kit and After sale-service 

Company Features
1. Specializing in manufacturing blow up slip n slide , Guangzhou JOY Inflatable Limited is chosen to be long-term suppliers for many companies.
2. Our factory has implemented a strict quality management system. This system requires various aspects of inspections, including inspection for the incoming materials, workmanship, and the final products.
3. We are committed to meet or exceed the requirements of all applicable environmental, health, and safety legislation. So we set environmental objectives and targets each year based on the previous year’s results and trends, and spare no effort to achieve these targets.