Hot Sale Customized Cube Gain Inflatable Exhibition Tent

Company Advantages
1. The design of JOY inflatable inflatable marquee to buy resorts to different technologies. Take its print circuit board as an example, it is designed using CAD, CAM, and light painting technology by the technicians.
2. Our rigorous quality control processes ensure that our products are of good quality.
3. This product excels at meeting and exceeding quality standards.
4. Guangzhou JOY Inflatable Limited has been verified by world-leading inspection company.

All kinds outside activities.  1.For party event.  2. wedding.  3. As a store.  4.exhibition.

Sewing machine for Cube silver tent and high-frequency heat combined for dome tent with the process of production, gas column with PVC double-sided coated cloth, tarpaulin waterproof, anti-ultraviolet materials, with fast forming, high strength, fire, mildew, anti-ultraviolet, moisture Etc. Tent for the inflatable tent, tent frame for the gas column structure, compared with the general metal bracket tent, with a light, folded after the small size, easy to carry and so on.

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the tent on the ground .
5.Connect the air inlet of inflatable tent and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable tent will be inflated within 10-30 minutes (depend the size of the tent ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design.
2、free repair material and repair video.

Company Features
1. With its own production base for inflatable marquee tent , Guangzhou JOY Inflatable Limited has become a competitive exporter in China.
2. Guangzhou JOY Inflatable Limited plays a leading role in developing technical capabilities.
3. Guangzhou JOY Inflatable Limited adheres to the business philosophy of honesty. Welcome to visit our factory! JOY inflatable will constantly adjust itself to suit the requirements of customers. Welcome to visit our factory!