Fire Rescue Inflatable Decontamination Tent | Fire Rescue Inflatable Decontamination Tent Work

The main purpose of the fire rescue inflatable decontamination tent:

The fire rescue inflatable decontamination tent is mainly used in the fire rescue and disaster relief process, and is more widely used in emergency events.

The main advantages of the fire rescue inflatable decontamination tent:

Simply use the inflator to inflate the inflatable frame, and the entire decontamination room will be quickly set up and connected After the water supply pipes in the shower, the whole system can be put into use. The decontamination shower room is completely closed to the outside, which can effectively prevent the polluted water from spreading to the surrounding environment in a strong wind environment. The washroom can be easily stored and transported in a carry bag, making it ideal for emergency rescue teams, fire departments, hospitals, military, and industrial security. The system is simple and convenient to set up, and is specially designed for rapid response to emergencies.

Workflow of fire rescue inflatable decontamination tent:

1. How to inflate the decontamination tent?

Choose a flat site, take out the inflatable tent from the package and spread it out flat, open the window or door zipper; open the tent's inflatable and exhaust valve cover, and use the inflatable port on the air duct of the inflatable pump. Rotate the charging and exhausting valve port to inflate (this method can be used to replace the reverse exhaust port of the inflator pump to complete the exhaust). After the inflation is formed, reverse the rotation to withdraw the air duct charging port, and immediately close the charging and exhausting valve cover; use pressure Table testing, inflation pressure should not exceed 15kpa; manual testing, air column capacity reaches 80%-90% saturation; that is, squeeze the air column with both hands to expand and contract about 1cm. (If the air pressure of the tent is insufficient, the foot pump can be used for air supply and pressurization); after the inflatable tent is formed, press the corresponding point of the pull rod to fix the ground rod at an angle of about 30 to 45 degrees, connect the pull rope to the ground rod and adjust the skateboard to fix the tent. The tent can be put into use; check the decontamination pipeline in the tent, check whether the valve is closed, and adjust the angle of the sprinkler head;

2. Preparations before decontamination

1 . Arrange the decontamination equipment on the side of the tent in the order shown in the figure to connect the pipelines;

2. Connect the quick-connect pipes that come with the decontamination equipment to: A: Water storage bag hot water reprocessor Chemical liquid mixing tank tent decontamination pipeline; B: After the sewage pump waste water recovery bag is connected according to the above pipeline, fill the water inlet pipe on the hot water reprocessor with water, open the screw above the pump inlet, and put the Drain the air, and then tighten the screws; (the air in the pipeline must be drained to work properly)

3. Unscrew the fuel tank cover of the cleaning machine, and store the diesel oil as indicated by the oil standard. Tighten the fuel tank cap and connect the hot water reprocessor to the power supply; connect the sewage pump power supply when the decontamination tent needs to drain water, and the sewage pump must not run without water.

4. Proportionately allocate sufficient detergent in the dispensing bucket, place the dispensing bucket on the support, and adjust the amount of medicine as required after connecting the suction catheter.

3. Decontamination operation

1. Start the water supply switch on the hot water reprocessor, and the water pump starts to work. At this time, the decontamination water is fed into the hot water reprocessor from the water storage bag. After being pressurized, the decontamination water is fed into the liquid mixing tank from the water outlet of the hot water reprocessor, and the liquid in the dispensing barrel is also mixed together. Suck it out, and then input it into the tent decontamination pipeline;

2. Turn on the control switch of the heating system at the same time, the heating system starts to work, first set the required temperature and press the confirm button, the temperature control system issues an instruction, and the combustion Room starts to work. At this time, the water temperature at the outlet of the hot water reprocessor is the set temperature. At this point public decontamination can take place.

Fourth, decontamination water treatment

Place the sewage pump in the decontamination tank, and connect the connecting pipe from the sewage pump to the waste water recovery bag. Activate the switch to collect the decontamination wastewater into the wastewater recycling bag.

5. Decontamination of the tent heating

1. Unscrew the fuel tank cap of the heater, and store the diesel oil according to the oil mark;

2 、Turn on the power supply, and connect the air supply pipe from the heater to the vent of the decontamination tent;

3. Press the switch, the heater starts to work, and the The hot air is transported directly into the tent through the ventilation duct.

6. Precautions

1. After cleaning, first turn off the heating system switch of the hot water reprocessor, and the water pump will continue to work for about 2-3 minutes until the combustion chamber of the heating system is heated. After the temperature drops, turn off the water supply switch to avoid equipment damage;

2. After decontamination and heating, turn off the switch first, and the fan will continue to work at this time. After the temperature of the heating system drops, it will automatically shut down. before unplugging the power plug.

3. Fireworks are strictly prohibited in the decontamination tent, away from heat sources;

4. The decontamination tent should not be in contact with sharp points, so as not to damage the airbag and canopy body;

5. It is forbidden to hang heavy objects on the decontamination tent frame, and the hanging heavy objects are less than or equal to 2KG;

6. Ensure the insulation of the power supply wires.

7. Precautions for inflation

1. The inflation pressure is 15-20KPA to prevent the air pressure from being too high or too low;

2. After the inflation is completed, put the The valve port is locked to ensure air tightness;

3. Check whether the air bag pressure is normal at any time, and take remedial measures in time if any abnormality is found;

4. Adjust the air bag at any time according to the change of ambient temperature pressure.

VIII. Storage conditions

The public decontaminated inflatable tents should be stored in a cool, dry and well-ventilated place with a relative humidity of not more than 50%.