event inflatable race arch supplier for child

Company Advantages
1. During the preliminary stage, JOY inflatable inflatable start finish line has to go through the ore extraction process. This process includes several stages, namely, beneficiation, refine, and melt processes.
2. The quality of the product is in tune with industry set standard and has passed the international certificates.
3. Guangzhou JOY Inflatable Limited keeps continuous innovation for better inflatable race arch to our customers.

All kinds outside activities

1.For party event     2. wedding       3. As a store       4.exhibition 

Technology : Sewing : we adopt special double needle strong thread sewing anywhere and quadruple stitching in positions sustaining much force and pressure for the inflatable arch  .

How to install  the inflatable arch?                                                                                                                                                            

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the tent on the ground .
5.Connect the air inlet of inflatable tent and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable tent will be inflated within 10-30 minutes (depend the size of the tent ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design 

2、free repair kit and After-Sale service 

Company Features
1. Guangzhou JOY Inflatable Limited devotes itself to the manufacturing and research and development of inflatable start finish line.
2. We take pride that we have a professional project manager. He/She has the responsibility for all processes in manufacturing, with the intention to lead the department to deliver accordingly to purchase orders and lead the department in a lean and efficient matter.
3. Sincerity to our customer is the most important in Guangzhou JOY Inflatable Limited. Get quote! Customers can be totally assured of our quality and after-sale service for inflatable race arch. Get quote! Emphasized on finish line arch , large balloons is Guangzhou JOY Inflatable Limited service principle. Get quote! What is the most important to JOY inflatable is that we should hold on to the goal of inflatable arch . Get quote!