Sports inflatable house tent for kids

Outdoor Inflatable Grey Pvc Canopy Cover Tent for Events

1.USE : Inflatable Marquee tent can be used both indoor and outdoor different activities, such as wedding party, exhibition, promotion, sport hall and ect
2.Installation :inflatable tents are easy to set up in a short time, and moveable to another place from one place as requested, it can stand up after inflated by air blower
3.Fix :We have make anchor in the bottom and D ring on the roof for light hanging inside. The tent can resist 6 level wind after fasten the tent.

All kinds outside activities.  1.For party event.  2. wedding.  3. As a store.  4.exhibition.

                           

FIRST

In the removal is the same, the metal stent removal and packaging required by the number of more time-consuming are relatively long. And inflatable tents in the demolition only need to let its natural deflated, or electric blower suction can be !

                           

logo pirnt 

We can print your logo, slogan or other messages on the tent. You'll be visible from all directions, regardless where your tent is located. That gives you up to six times more promotional space than an ordinary sign, plus the advantages of having an eye-catching dome. 

                           

Waterproof 

0.4mm PVC tarpaulin is waterproof and transparent PVC cover the pinhole with high temperature multifunctional welding machine, which is protect the water from the pinhole .

All sewing inflatable products are made by high precision machines and using unique 12 in one waterproof nylon threads . We use double stitching for both inside and outside of the products and quadruple stitching for the force loading bottom . For each corner and connection, there are reinforce straps to make sure the product are safe enough for all wind and tension . The length of each single sewing needle is 3mm-8mm

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free to design 

2、free repair material and repair video