Soccer Ball Inflatable Football Bouncer Jumping Castle House For Kinds

 

This soccer ball themed combination bouncer jumping house for the Children . You don't need suit up even to have great time , just need jump and bounce. The size of the football bouncer is 4m in diameter and the front step is 1m .  The holes of the bouncer all are with the white net to cover .You can rent the bouncer  in your country likes a school is hosting a football tournament, or wants to make an impact with the opening day festivities .  You aslo can set it on the backyard for your children playing .

We have experienced team and high tech equipments to product the in the inflatable area . We can provide the free design for all the inflatable porducts and offer you the very competition price .These two pictures are feedbacked from our customers 

                           

1. double +quadruple  stiches

We used double stitching everywhere make sure the inflatable strong enough with quadruple stitching at the bottom and stree points ,

                           

2. Reinforced Strip and seams

All of our sewing inflatables are stitched by high precision stitching machine with super excellent 9 in 1 waterproof nylon threads, like the following image shows. 

Stiching reinforce strips at every joint to protect bouncing area and seams which makes the inflatable safer and more durable . Stiching reinforce strips at every joint to protect bouncing area and seams which makes the inflatable safer and more durable .

                           

3.Transparent pocket 

The left and right sides of the entrance is with the transparent pocket (the size is as same as the 4 A paper ) which is for the people put the disclaimer inside . 

                           

4. D anchor ring 

Our inflatable football bouncer is equipped with 360 stainless steel D anchor point which is used to be fix the bouncer on the ground and remain steady .

1.Firstly Insert the Nozzle of the blower into the blower pipe and then tight alternative air inlet with a rope.
2.Turn on the blower start to inflate the airt bag .
3.When the air bag was be built up in the foam pit and check every stake was be inflated or not .
4.After the air bag was be inflated perfectly ,pls turn off the blower to deflate and then put the cover on the stakes .
5.Spread out and flatten the cover and the last turn on the blower again (Keep the blower work all the time during the use )

1、free design 

2、free repair kit and the After- Sale Service