quality inflatable water slide directly sale for kids

Company Advantages
1. JOY inflatable inflatable water slides for sale is exclusively developed by the in-house R&D team who devote themselves to create a product that fits perfectly with the phones. Ou products are of high durability and stability
2. This product is most suitable for those who attach high importance to quality. It provides enough comfort, softness, convenience, as well as a sense of beauty. We adopt environmental protection and and non-toxic materials
3. The product has long-lasting performance and strong usability. Our products have been sold to over 60 countries including Japan, France, America and etc

All kinds outside activities.  

everywhere from the backyard to a resort or campground , hillside  b

Air tight technology: Welder by Miller machine in high steam and reinforcement at joint part .

Features:100% waterproof ;only once inflate ,airtight

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the tent on the ground .
5.Connect the air inlet of inflatable tent and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable tent will be inflated within 10-30 minutes (depend the size of the tent ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design
2、free repair kit and After-sale Service 

Company Features
1. Guangzhou JOY Inflatable Limited has been receiving wide popularity in inflatable water slide industry since its establishment.
2. The continuous research of new applications and the constant product innovation allow Guangzhou JOY Inflatable Limited to offer customized solutions.
3. We have a clear business strategy: green production. This means we will seek to minimize the negative impact of the production process on the environment at every stage, including minimizing emissions, controlling wastes, and minimizing the life-cycle cost of products.