Military inflatable marketing inquire now for outdoor

Company Advantages
1. The manufacture of JOY inflatable inflatable marketing involves a wide range of stages, including 3D imaging, quality systems, measurement & inspection, and additive manufacturing/3D printing. Ou products are of high durability and stability
2. The product with a high cost performance is widely used in the market. Our products are designed by the first-rate designers
3. The product has ultra-high elasticity. Its surface can evenly disperse the pressure of the contact point between the human body and the mattress, then slowly rebound to adapt to the pressing object. We can print your logo, slogan or other information you ask for
4. The product is proven to be free of the dangers of electrical shock. It has passed the leakage current testing, which means that it has no power flows to the ground terminal. All the materials we used are based on the international standard
5. The product has reliable electric performance. The electric systems, including circuit arrangement, insulated housing, and wires and plugs have been optimized to a high safety level. Guaranteeing the safety of our products is an important quality inspection standard

All kinds outside activities.  1.For medical event.  2. emergency .   3.military

heat welding machine : High precision heat welding machine and elaborated welding work for the water park  .we can perfectly seal all the material pieces together into any reasonable inflatables, and heat weld all of our airtight inflatables with top quality standard with high efficiency

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the tent on the ground .
5.Connect the air inlet of inflatable tent and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable tent will be inflated within 10-30 minutes (depend the size of the tent ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free to desige fee.
2、free repair material and repair video.

Company Features
1. Guangzhou JOY Inflatable Limited is a mainstay Chinese enterprise of inflatable marketing .
2. Our company has in-house manufacturing units. They are well-equipped with all the latest equipment and machinery to maintain a rapid rate of production.
3. Guangzhou JOY Inflatable Limited is well prepared to face all the challenges on the road of development. Welcome to visit our factory!