Company Advantages
1. Excellent tensile and tear also makes our products outstanding. kids inflatable water slide are available in many frame sizes and we offer a range of commercial water slides systems for handling a variety of giant inflatable water slide.
2. The high quality materials of PVC are adopted to manufacture products. JOY inflatable inflatable water slide,big inflatable water slides adopts large inflatable water slides, ensuring inflatable water slide for pool..
3. Guangzhou JOY Inflatable Limited has now come into the competitive phase of integrated strength after long time of rapid development in inflatable water slides for sale field. Our products are of excellent weather resistance which prolong the service life
4. inflatable pool slide is available for commercial inflatable water slides and international certificate as inflatable water slides for adults.And our products can be installed very easily

All kinds outside activities.  

everywhere from the backyard to a resort or campground , hillside  b

Air tight technology: Welder by Miller machine in high steam and reinforcement at joint part .

Features:100% waterproof ;only once inflate ,airtight

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the tent on the ground .
5.Connect the air inlet of inflatable tent and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable tent will be inflated within 10-30 minutes (depend the size of the tent ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design
2、free repair kit and After-sale Service 

Company Features
1. Guangzhou JOY Inflatable Limited is proud to be a pioneering manufacturer of inflatable water slide.
2. Guangzhou JOY Inflatable Limited has exquisite processing level for inflatable pool slide.
3. Guangzhou JOY Inflatable Limited makes use of kids inflatable water slide service concept to construct large power customer management information system. Inquiry!