JOY inflatable watchtower bubble tent supplier for outdoor

Company Advantages
1. The production of JOY inflatable bubble tent complies with international manufacturing standards. Thus, the use of toxic bleaches, dyes, and other chemicals is limited. Our products are suitable for kids who are from 3 to 7 years old
2. The product gives wearers enough rooms to move around normally without tightening against their bodies. Wearers can freely move and stretch. All our products conform to EN14960 standard
3. bubble tent 's popularity has close relation with the its features such as bubble tent purchase . Our products have been sold to over 60 countries including Japan, France, America and etc
4. As the central of bubble tent purchase , bubble tent is both qualified with high performance and high quality. Ou products are of high durability and stability
5. bubble tent offers bubble tent purchase , while maintaining an exemplary clear inflatable bubble tent . All the materials we used are based on the international standard

All kinds outside activities.  1.For party event.  2. camping .  3.hotel .  4.exhibition.

Make it look more like a mobile hotel room .It can be easily installed in parties, parks, amusement centers, backyard, gardens.Cheap inflatable bubble tent for outdoor camping and beach sight-seeing . 

heat welding machine : High precision heat welding machine and elaborated welding work for the inflatable bubble tent .we can perfectly seal all the material pieces together into any reasonable inflatables, and heat weld all of our airtight inflatables with top quality standard with high efficiency

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the tent on the ground .
5.Connect the air inlet of inflatable tent and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable tent will be inflated within 10-30 minutes (depend the size of the tent ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design 

2、free repair kit and After-Sale service 

Company Features
1. Strict tests have been conducted for bubble tent .
2. We are always committed to becoming the top one brand in bubble tent purchase industry in China.