JOY inflatable toy bubble tent supplier for outdoor

Company Advantages
1. JOY inflatable bubble tent is of scientific design. Important elements are taken into account, including the effects of thermal expansion and contraction, the sway and movement of a building, and thermal efficiency. Our products are designed by the first-rate designers
2. People can use it in hot and humid conditions without any concern. For example, many of customers who bought it have used it in the beaches. The high quality materials of PVC are adopted to manufacture products
3. It is produced under a strict internal quality control regime. And our products can be installed very easily

All kinds outside activities.  1.For party event.  2. camping .  3.hotel .  4.exhibition.

Make it look more like a mobile hotel room .It can be easily installed in parties, parks, amusement centers, backyard, gardens.Cheap inflatable bubble tent for outdoor camping and beach sight-seeing . 

heat welding machine : High precision heat welding machine and elaborated welding work for the inflatable bubble tent .we can perfectly seal all the material pieces together into any reasonable inflatables, and heat weld all of our airtight inflatables with top quality standard with high efficiency

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the tent on the ground .
5.Connect the air inlet of inflatable tent and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable tent will be inflated within 10-30 minutes (depend the size of the tent ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design 

2、free repair kit and After-Sale service 

Company Features
1. Our factory is equipped with advanced computer-assisted machines. This computer assistance improves accuracy and minimizes errors during production, allowing us to achieve state-of-the-art manufacturing.
2. Based on the tenet of inflatable lawn tent for sale concept, the company has achieved great development. Contact us!