JOY inflatable Quality inflatable air bag factory for high jump training

Top Sheet :0.9mm PVC tarpaulin ; measurement ; logo and the color are customized . Logo usually print on the top sheet .

Air pillars : Inflatable pillars is good to abord more impact of the falling .

Side flag : removable flag ,when the slide flag was be damaged you can replace it .

Bottom Chamber : Separate top chamber with the ground ;protect air bag and prevent people from touching ground


After the first person has landed , the system has to recover bacause a great volume of air has been expelled at impact which renders it ineeffective for a perild of time 

b

We research and develop the Inflatable Airbag Jump Stunt Trampoline foam pit air bag  – A saving cost , durable airbag designed to cope with multiple simultaneous landings from up to 8 meters above ground level. Today the foam pit air bag  is the most durable and health, reliable and safe alternative to traditional foam pits on the market fortrampoline party .Guangzhou Joy Inflatable Limited is using the 0.55mm and 0.9mm Plato Chemical materials which is fireproof and the most advanced production techniques available the stunt air bag is meeting trampoline parks across the globe's standard

                           

1. Safety and durability

The jump air bag has 2 chambers: the bottom chamber is firm (maintaining the stability) while the upper one is soft.

 

 

Our foam pit air bag features as many as 4 air pillars per m2 ! The interconnected air -pillars absorb impact individually and uniformly offering uninstalled safety and maximum durability 

                           

2. Net hole 

We usually make at least two net holes for each piece air bag for the customer to adjust the inside air . If you want more soft you can open the net hole as same as the picture . But if you want enough air inside you can close the net hole .（open all , cover 1/3; 1/2; all are available）

                           

3. Double cover more durble

We made double cover for the inflatable air bag , the upper cover is dismountable .When the cover was be damaged  so you just need replace the the upper cover .

                           

4. Reinforment

Extra webbing reinforced strip on all the stress points, interior panels and the cover

athe apron of our air bag will connect with the air bag elastic string 

VS

not the elastic string 

1. Firstly Insert the Nozzle of the blower into the blower pipe and then tight alternative air inlet with a rope.
   2.Turn on the blower start to inflate the airt bag .
   3.When the air bag was be built up in the foam pit and check every stake was be inflated or not .
   4.After the air bag was be inflated perfectly ,pls turn off the blower to deflate and then put the cover on the stakes .
   5.Spread out and flatten the cover and the last turn on the blower again (Keep the blower work all the time during the use )
   

Something the customer not sure about the posistion of the blower vent so we will make the blower vent in the four sides .You can choose the one blower vent to connect the blower to inflate the air bag , and put the others blower vent inside as same as the video.

1、free design

2、free repair kit and the after-sale service