JOY inflatable playground inflatable race arch wholesale for child

Company Advantages
1. Inspections for JOY inflatable large balloons will take place during and after production. During production, the product will be checked for sewing quality (seams, stitches, and openings), and physical properties (resistance to tearing, shrinkage, color fastness) after production. Our products feature unique appearance
2. People can use it for one-time events such as exhibitions or opening ceremony or put it at store locations for long periods of times. We use high quality and high standard materials
3. The product is user-friendly. Under the concept of ergonomics, it is regulated to adjusts to the user's actual needs. Guaranteeing the safety of our products is an important quality inspection standard

All kinds outside activities

1.For party event     2. wedding       3. As a store       4.exhibition 

Sewing machine for the inflatable model  gas column with oxford fabric double-sided coated cloth, tarpaulin waterproof, anti-ultraviolet materials, with fast forming, high strength, fire, mildew, anti-ultraviolet, moisture Etc. Tent for the inflatable tent, tent frame for the gas column structure, compared with the general metal bracket tent, with a light, folded after the small size, easy to carry and so on.

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the tent on the ground .
5.Connect the air inlet of inflatable tent and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable tent will be inflated within 10-30 minutes (depend the size of the tent ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design 

2、free repair kit and After-Sale service 

Company Features
1. We have a strong development team who is equipped with many-core technologies knowledge. They have successfully released a series of products which are loved by many customers.
2. We will pursue an eco-friendly way throughout the business activities. We will make efforts to extend the product life cycle so as to reduce wastes and pollution.