JOY inflatable outdoors Inflatable water park design for outdoor

Company Advantages
1. JOY inflatable custom made inflatables is well designed. The shape of this product is carried out with the help of some advanced design tools such as the 3D-CAD design tool. Our well-selected materials are good enough to satisfy the standards of EN71
2. Thanks to its high efficiency, the product only consume a little power energy. People said the operating cost of this product is lower than they expect. Our products enjoy 3-5 years warranty
3. The product has a complete life cycle due to the strict testing which is in line with the internal and external standards. Thus, the product is durable in use for a long time. Guaranteeing the safety of our products is an important quality inspection standard
4. Through the production of products, we establish effective quality control system to ensure the consistency of product quality. We adopt environmental protection and and non-toxic materials

All kinds outside activities

1.For party event     2. wedding       3. As a store       4.exhibition 

Sewing machine for inflatable model PVC double-sided coated cloth, tarpaulin waterproof, anti-ultraviolet materials, with fast forming, high strength, fire, mildew, anti-ultraviolet, moisture Etc. Tent for the inflatable tent, tent frame for the gas column structure, compared with the general metal bracket tent, with a light, folded after the small size, easy to carry and so on.

How to install  the inflatable advertising products?                                                                                                                    

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the tent on the ground .
5.Connect the air inlet of inflatable tent and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable tent will be inflated within 10-30 minutes (depend the size of the tent ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design 

2、free repair kit and After-Sale service 

Company Features
1. We have introduced the world’s advanced production facilities, including a new generation of testing machines and highly efficient automatic machines. These machines can definitely help promote product quality and improve workmanship levels.
2. For years, we have been taking a visionary approach to supporting environmental progress. We’ve integrated environmental and social criteria into our innovation process so that every new product or we launch contributes to sustainability.