JOY Inflatable medical inflatables company for outdoor

The inflatable medical tent is a mobile inflatable isolation tent with negative pressure and no steel components. It includes an inflatable frame, a top cover, an air compressor etc.  Quick installation is the greatest strength and can be done in 8-10 minutes. It can stand about 5 days after once inflate , making it ideal for temporary medical checkpoints. 

All of our the materials is good waterproof and UV resistance. The large interior space is quite comfortable and we can make different number rooms depend on your requirment. The four sides are fixed with a pull rope to ensure the stability of the structure.

We has developed the latest medical tent , which can provide shelter, disaster relief and emergency rescue for the military and medical treatment system. It can be widely used in temporary isolation areas, quarantine offices, medical supplies warehouses, field hospitals, emergency medical rescue and so on

All kinds outside activities.  1.For medical event.  2. emergency .   3.military

                           

Windproof 

 The four sides and bottom are fixed with a pull rope to ensure the stability of the structure during the wind day.

                           

Waterproof 

0.6mm PVC tarpaulin is waterproof and the airtight inflatables are made with high temperature multifunctional welding machine, which is necessary and efficient for massive waterproof airtight inflatables 

                           

Easy to install 

You can install or disassemble in a very short time to save you valuable time; better insulation, inflatable tents with high quality pvc waterproof canvas, tear resistance, better tensile strength, anti-aging Better sex, long service life. In the weight and 8 wind load under the safe use of continuous service life of more than 2 years.

heat welding machine : High precision heat welding machine and elaborated welding work for the water park  .we can perfectly seal all the material pieces together into any reasonable inflatables, and heat weld all of our airtight inflatables with top quality standard with high efficiency

handles, anchor rings are welded  

VS

handles, anchor rings stick with glue

pressure; Air relief valve; Intake valve

VS

only with intake valve when Sharp differences in temperature the product will be easy to burst

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the tent on the ground .
5.Connect the air inlet of inflatable tent and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable tent will be inflated within 10-30 minutes (depend the size of the tent ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design.
2、free repair material and repair video.