JOY Inflatable Latest world's biggest inflatable water slide supplier for children

Company Advantages
1. The materials of JOY Inflatable are selected and sent to testing to ensure that the basic safety features are in place. These include things like flammability ratings, abrasion resistance, and more. All the materials we used are based on the international standard
2. world's biggest inflatable water slide products are up to the international standard. Our products are designed by the first-rate designers
3. Every aspect of the product is strictly tested to meet international quality standards. Our well-selected materials are good enough to satisfy the standards of EN71

All kinds outside activities.  

it must be built upon a slipe with 15-30 angles,both street, and hill 

The slip n slide is a classic backyard activity. That’s why we offer commercial slip n slides for summer camps, resorts, and homes that take this time-honored concept and we put our own adventurous twist on it. 

Air tight technology: Welder by Miller machine in high steam and reinforcement at joint part .

Features : Only work inflate by the air pump 

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the slide on the ground .
5.Connect the air inlet of inflatable slide inflate it .When the slide was be built up on the ground with 90% air inside you can turn off the air pump .
6.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design 
2、free repair kit and After sale-service 

Company Features
1. JOY Inflatable is professional in manufacturing world's biggest inflatable water slide .
2. The quality for our giant inflatable water slides is so great that you can definitely rely on.
3. JOY Inflatable will continue to improve productivity and production quality and provide innovative products. Call!