JOY inflatable jumper instant inflatable marquee for outdoor

Company Advantages
1. JOY inflatable instant inflatable marquee has a user-centric and product-centric design.
2. With the strict quality inspection procedure throughout the whole production, the product is bound to be exceptional in quality and performance.
3. The product is of the highest quality, performance and durability.
4. This product will reduce the need for the workforce for its highly advanced system. It will directly cut down labor costs.

Sewing machine for Cube silver tent and high-frequency heat combined for dome tent with the process of production, gas column with PVC double-sided coated cloth, tarpaulin waterproof, anti-ultraviolet materials, with fast forming, high strength, fire, mildew, anti-ultraviolet, moisture Etc. Tent for the inflatable tent, tent frame for the gas column structure, compared with the general metal bracket tent, with a light, folded after the small size, easy to carry and so on.

How to install  the inflatable tent ?                                                                                                                                                                            

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the tent on the ground .
5.Connect the air inlet of inflatable tent and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable tent will be inflated within 10-30 minutes (depend the size of the tent ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design

2、free repair kit and the After-sale service 

Company Features
1. Guangzhou JOY Inflatable Limited has its special showroom for visitors who come to our factory for business negotiation.
2. The technicians who have been experienced in producing inflatable marquee are well-equipped in our factory.
3. JOY inflatable uses our industry knowledge, expertise and innovative thinking to drive customers' business growth and bring you greater benefits. Get quote! Guangzhou JOY Inflatable Limited has always been committed to becoming the best instant inflatable marquee supplier. Get quote! We always adhere to high-quality of JOY inflatable brand products.