Custom Inflatables Factory professional custom inflatable tents and inflatable water park- Joy Inflatable
|Materials||Durable 0.6mm PVC1000 D /18.5OZ PVC coated vinyl which is waterproof ,fireproof and u/v protected|
|Inflate and Deflate||Easy to install and take down|
|Air tight technology: Welder by Miller machine in high steam and reinforcement at joint part .|
|Features : only once inflate by the air pump|
|Printing||Logo printed by Digitally printing or Silk-screen printing|
|Air Pump(airtight product)||Air pump with CE/UL certificates, 110V/220V, various powers|
|Accessories||Blower or air pump , repair Kit ,Glue ,Carry bag （for free )|
|Inflatable product is packed by heavy-duty PVC carry bag;|
|air blower/ air pump is packed by exported standard carton.|
The inflatable water slip N slide is 25 m long and 2 m width just with 1 lane (of course it can be single laneas well as triple ) is made by 0.9mm PVC tarpaulin which is strong tension. The inflatable long slip and slide are airtight only once inflate by the air pump when the slide was be inflated 90% air inside you can turn off the air pump.
Depend upon this tyle inflatable city water slide, it must be built upon a slope with 15-30 angles, both street, and hill, so that people can freely slide to the end with water. Climb up, tumble down, shake yourself off and try again, once you are successful and reach the top of the city slide you are ready to slide down. Of course, you can add some soap foam on the slide to make it more smooth and Slippery or all kinds of swim rings to push you fast to slide. In addition, when people are playing, you need to spray water with the water pipe. All the inflatable slides manufactured by Guangzhou Joy Inflatable Limited are so much fun for kids as well as big kids wanting to have a blast. All of our inflatable slides are suitable for a variety of ages.
All kinds outside activities.
it must be built upon a slipe with 15-30 angles,both street, and hill
The slip n slide is a classic backyard activity. That’s why we offer commercial slip n slides for summer camps, resorts, and homes that take this time-honored concept and we put our own adventurous twist on it.
◪With 0.9 mm PVC 1000D PVC which is waterproof and fireproof.
◪High grade PVC net cloth USES environmental protection 3P raw material, non-toxic and tasteless, anti-uv, anti-aging, flame retardant, meet international standard.
◪PVC net cloth is a product that is made of transparent PVC film and grid cloth. It can clearly see the middle net cloth through PVC film.
◪ It has a strong three-dimensional feeling and feel soft and hard. It belongs to environmental protection and low toxicity products.
◪All new material production, used all year round outdoors for 3-5 years!
Air tight technology: Welder by Miller machine in high steam and reinforcement at joint part .
Features : Only work inflate by the air pump
1.To find space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the slide on the ground .
5.Connect the air inlet of inflatable slide inflate it .When the slide was be built up on the ground with 90% air inside you can turn off the air pump .
6.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .
If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.
2、free repair kit and After sale-service
Copyright © 2019 GUANGZHOU JOY INFLATABLE LIMITED | All Rights Reserved Design by www.joyinflatable.com
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.