JOY inflatable inflatable tent factory for children

Company Advantages
1. The main components of inflatable tent are made from imported materials.
2. The product is eco-friendly. It has been tested and passed the GB/T 1885-2002 Technical Requirements of Ecological Textile.
3. The product is easy to care for. People simply need to wipe the dust and stains on its surface with a slightly damp cloth.

All kinds outside activities

1.For party event     2. wedding       3. As a store       4.exhibition 

Sewing machine for Cube silver tent and high-frequency heat combined for dome tent with the process of production, gas column with PVC double-sided coated cloth, tarpaulin waterproof, anti-ultraviolet materials, with fast forming, high strength, fire, mildew, anti-ultraviolet, moisture Etc. Tent for the inflatable tent, tent frame for the gas column structure, compared with the general metal bracket tent, with a light, folded after the small size, easy to carry and so on.

How to install  the inflatable tent ?                                                                                                                                                                              

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the tent on the ground .
5.Connect the air inlet of inflatable tent and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable tent will be inflated within 10-30 minutes (depend the size of the tent ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

If you find a leak, you can wipe the air column first, then apply the surface with soapy water to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance cloth (any specifications of the inflatable tents inside the standard), and then brush dispensing, to be dry after the paste on the leak.
If the leak at the gas column heat seal at the opening of plastic, can be divided into the following steps:
1. First clean up the bonding surface.
2. Guangzhou Joy Inflatable Limited of the inflatable tents will be issued to the bottle of glue, inflatable tent column dedicated plastic, it will be painted on the pre-adhesive surface, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3. The shape of the mouth to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4. To be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.

1、free design 

2、free repair kit and After-sale service 

Company Features
1. Since inception, Guangzhou JOY Inflatable Limited has continued to provide high quality inflatable tent wholesale. We are considered as a trustworthy provider and distributor.
2. Our production technology for inflatable tents for sale is in a leading position in the world and has a broad prospect.
3. The ability of Guangzhou JOY Inflatable Limited to produce inflatable tent is in a leading position. In the long run, JOY Inflatable will always create value for customers. Get quote! Guangzhou JOY Inflatable Limited is well prepared to face all the challenges on the road of development. Get quote! The worth of Guangzhou JOY Inflatable Limited would be to supply each provider with top quality inflatable tent. Get quote!